[WT-support] ea9lz, help, ezmaster and wx0b sixpack control

HRS I4UFH i4ufh at hamradiosolutions.com
Thu May 10 23:23:37 CEST 2007


Hi Jorge,

Dani is right, each output in the relay board can be setted as positive or
negative output, simply open the top cover and look for on the relay board
the silked name of the relay, as A1 to A16 B1 to B16, these are the relay
identification and pin out. Each relay has jumper near the relay the default
position is grounding moving the jumper to the left position you get
positive output. Do do that you need to power the EZMaster with an external
power supply that supply the enough current to the Antenna MAtrix OUT.

About your messages, I received only these one the WT reflector, none
direct, non on the EZMaster reflector, apologies for delays and trouble, but
really not received or missed in the spam.

please try to contact me also at i4ufh at libero.it, may be better from your
side

73 de Fabio I4UFH




> Well Fabio, I am sending you more than 20 emails to your personal email
and
> I never get an answer, well I need to asking you few things more.
>
> 1.- About Antena matrix and DBS25 pin I have clear, but I need to ask you,
> as you know the sixpac control box working as this way, 10 to 160 it's
> positive, and negative wiring from power supply to sixpack control box and
> from here to sixpack antennas.
> 2.- As you know, I must turn off the sixpack control box, then I hope so,
> from ezmaster DBS25 I will get positive, but my question it's, wich pin
it's
> negative?
> 3.- Few days a go, I talk to Dani 5FV and he talk me that inside the
> ezmaster there is some bridge, I must change this bridge and do the bridge
> from middle to rigth side, my questions it's this Okay? or not? now the
> bridge it's middle to left side, please let me know the correct answer to
> this questions I have and let me know if I have to do any other changes or
> not.
> 4.- you must know that right now I have all wiring as you says, of course
> also I have the ezmaster wiring to external 12vdc power supply, and the
> sixpack do not work at all.
> 5.- finally please, send me answer to my emails I were sending you to your
> personal email.
>
> waiting yours news as soon as possible.
> 73s
> ea9lz
>
>
> >From: "HRS I4UFH" <i4ufh at hamradiosolutions.com>
> >Reply-To: support at win-test.com
> >To: <support at win-test.com>
> >Subject: Re: [WT-support] ea9lz, help, ezmaster and wx0b sixpack control
> >Date: Thu, 3 May 2007 22:54:13 +0200
> >
> >Hi Jorge,
> >
> >This a sample how to wiring you SixPAxk to EZMaster, most depend from
wich
> >antennas you have connected :
> >
> >
> >About connecting EZMaster you need to wire two cables with a DB25 female
> >connecting the follow pin to the SixPack port A and B.
> >
> >
> >Antenna Matrix A DB 25             SixPack PortA
> >
> >Pin 1                                              Terminal strips
labeled
> >A10
> >Pin 2                                              Terminal strips
labeled
> >A15
> >Pin 3                                              Terminal strips
labeled
> >A20
> >Pin 4                                              Terminal strips
labeled
> >A40
> >Pin 5                                              Terminal strips
labeled
> >A80
> >Pin 6                                              Terminal strips
labeled
> >A160
> >
> >Antenna Matrix B DB 25             SixPack PortB
> >
> >Pin 1                                              Terminal strips
labeled
> >B10
> >Pin 2                                              Terminal strips
labeled
> >B15
> >Pin 3                                              Terminal strips
labeled
> >B20
> >Pin 4                                              Terminal strips
labeled
> >B40
> >Pin 5                                              Terminal strips
labeled
> >B80
> >Pin 6                                              Terminal strips
labeled
> >B160
> >
> >
> >At this time is enough to enable in Win test in the EZMaster
configuration
> >menu  You need to set this check in the Radio1TX frame and after that
click
> >on "Copy 2 to 1" and "Copy RX to TX", this selection need to be made for
> >both Radio1 and Radio2.
> >
> >At the end click OK.
> >
> >When you change band inside WT, you antenna will be selected
automatically
> >
> >Best 73 de Fabio I4UFH
> >
> >
>
> _________________________________________________________________
> Moda para esta temporada. Ponte al día de todas las tendencias.
> http://www.msn.es/Mujer/moda/default.asp
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>



More information about the Support mailing list