[WT-support] Multi Single Cabrillo file output

[Juha Rantanen]

Gerard Jendraszkiewicz wrote:
> Hello,
> 
> This weekend we operated AJ9C multi/single. We had 2 computers/radios 
> running WT. In WT the setup was for one to be run and the other station 
> to work multipliers.The computers were networked together and running 
> same version of WT (latest one). In the WT log window the contact was 
> showing R or M on the very right column which is good !

And that is the only place you see the RUN/MULT station status.

> When I go and generate the Cabrillo file I do not see any change from 0 
> to 1 for the radio number when the multiplier station works a contact. 
> Any ideas on what has gone wrong ? The multiplier radio should have a 1 
> in the radio column for multiplier QSOs.

No it shouldn't. The 0 and 1 are only used in M/2 category to separate 
RUN1 and RUN2 stations.

> What do I have to do to generate the correct cabrillo file ?

You have it already. Just send that one.

Juha OH6XX