[WT-support] Multi Single Cabrillo file output

Peter Bowyer peter at bowyer.org
Mon Mar 26 17:01:38 CEST 2007

On 26/03/07, Gerard Jendraszkiewicz <jend at midway.uchicago.edu> wrote:
> Hello,
> This weekend we operated AJ9C multi/single. We had 2 computers/radios
> running WT. In WT the setup was for one to be run and the other station
> to work multipliers.The computers were networked together and running
> same version of WT (latest one). In the WT log window the contact was
> showing R or M on the very right column which is good !
> When I go and generate the Cabrillo file I do not see any change from 0
> to 1 for the radio number when the multiplier station works a contact.
> Any ideas on what has gone wrong ? The multiplier radio should have a 1
> in the radio column for multiplier QSOs.
> What do I have to do to generate the correct cabrillo file ?


M/S entries do not need the station number. M/2 is the only category
where that's needed.

Peter G4MJS

Peter Bowyer
Email: peter at bowyer.org

More information about the Support mailing list