[WT-support] Wintest - Telnet with via GPRS connected

[Patrick 9A5CW]

Hi, i had the same problem with GPRS conection and this is what i have done:
1. Used GPRS + my HP notebook + simple network switch or hub (all setting
wtdxtelnet + wt by default in both programs just "press" default)
2. same but without network hub/switch but enabled WIFI lan on my notebook
in ADHOC mode.

If u do this all works fine, WT comunicates with wtdxtelnet ...

4 the WT team:
I have noticed that if I have internet spots enabled and when i run CW (comm
port),
and when i call CQ or sending CW out and at the same time i receive packet
spot CW became unreadible.
This mean i lost few dots or dashes ....
I am using HP notebook  running at 400MHz(cpu) with WINXP Home + 512MB ram +
AMD CPU 2800+ sempron mobile.
It's better to "play" CW from LPT port?
73 de Patrik 9A5CW - 9A1P TEAM


On 3/15/07, Pablo - EA4TX <ea4tx at ea4tx.com> wrote:
>
> Gordon,
>
> You must configure both Win-Test and WtDxTelnet as follows:
>
>        Broadcast IP Address: 127.255.255.255
>
> In other way, the traffic received by WtDxTelnet from your cluster, will
> be
> again re-send via the GPRS network, and will cause a traffic overload on
> your GPRS Link. Maybe O2 filter this UDP traffic and causes it to not be
> received on WT....
>
> 127.255.255.255 is a loopback address for internal comunications at the
> same
> computer, and I have just tested, to assure it works.
>
> Well, test it and let us know.... but it shoudl work!
>
> 73's Pablo - EA4TX
>
>
>
>
> -----Mensaje original-----
> De: support-bounces at win-test.com [mailto:support-bounces at win-test.com]En
> nombre de gordon.paterson at blueyonder.co.uk
> Enviado el: jueves, 15 de marzo de 2007 14:23
> Para: support at win-test.com
> Asunto: [WT-support] Wintest - Telnet with via GPRS connected
>
>
> I have been testing successfully connection via GPRS for when operating
> portable. It connects fine and the wtDxTelnet client also connects and
> downloads fine. However, I cannot get it to talk to Wintest any more.  I
> have looked at the Wiki and it doesn't cover this circumstance.
> I am using an XP laptop and connecting via GPRS to O2 network. I get
> address via IP and accordin to IPCONFIG, my assigned address is
> 10.226.238.93 on a subnet of 255.255.255.255. I go to both Win-Test and
> the telnet client Network properties and click default button. It then
> changes the broadcast address to 10.226.238.255. However, no data streams
> into the cluster in the client, although the Telnet client is working
> fine.
> If I try to ping 10.226.238.255, I get no reply.
> Wonder if you can help please?
> Thanks
> Gordon
> MM0GPZ
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>



-- 
9A5CW - Patrik Hrvatin
--... ...--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070315/55e7a4fa/attachment.htm