[WT-support] Control-S Swap Radio

[Olivier F5MZN]

Hi -

Jim Martin wrotte:
> Set-up is MP as radio 1 and IC746pro as radio 2 using MK2R for SO2R.
> Control-S swaps the radio's okay but sometimes fails to change mode or 
> changes the frequency to that of the second VFO.

Can this occurs with both radios? Can you give an exemple of what 
happens exactly when it fails in opposition to what should be expected?

How often does this approxymately occur?

> I also have a problem using 'CI-V Transceive' setting for the Icom.  With 
> this selected the busy led on the MK2R starts to flash after pressing an F 
> key to send a message. With the router page open I can see the Icom becomes 
> greyed out and comms are lost. If I move the dial of the Icom slightly comms 
> are re-established with it and the busy led goes out.
> Also when CI-V is unchecked in WT configuration the message 'microKeyer 2R 
> detected' appears in the second radio window.  If I have CI-V Transceive 
> selected this message does not appear.

I'm not sure MK2R can operate properly with the CI-V mode enabled. Maybe 
Jozef OM7ZZ (in cc of this email) could clarify?

73,
-- 
Olivier / f5mzn