[WT-support] Control-S Swap Radio

[Jozef Urban, OM7ZZ]

Hi guys,

>> I also have a problem using 'CI-V Transceive' setting for the Icom.  With
>> this selected the busy led on the MK2R starts to flash after pressing an 
>> F
>> key to send a message. With the router page open I can see the Icom 
>> becomes
>> greyed out and comms are lost. If I move the dial of the Icom slightly 
>> comms
>> are re-established with it and the busy led goes out.
>> Also when CI-V is unchecked in WT configuration the message 'microKeyer 
>> 2R
>> detected' appears in the second radio window.  If I have CI-V Transceive
>> selected this message does not appear.
>
> I'm not sure MK2R can operate properly with the CI-V mode enabled. Maybe
> Jozef OM7ZZ (in cc of this email) could clarify?

There shouldn't be a problem with Router if CI-V transceive is enabled. 
Router pass broadcast packets from radio to virtual serial port. 
Additionally benefits from this, updates records on frequency change much 
faster.

73 Jozef OM7ZZ


> 73,
> -- 
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support