[WT-support] S&P V3.14.0

[f6ify]

Olivier F5MZN a écrit :
> Hi -
> 
> Baker wrotte:
>>>>> I expected that if I changed the radio frequency by greater than the
>>>>> Frequency
>>>>> Change Threshold that the call I had manually entered would be
>>>>> transferred to
>>>>> the Bandmap  display and the entry line wiped. This does not happen.
>>>>>
>>>> Affirmative, that should work like you described as far as the S&P mode
>>>> is enabled. In RUN mode, nothing happens when you change the frequency.
>>>> I have confirmation from some users that it works that way, at least for
>>>> the primary radio (= active radio).
>>>>
>>>> Can you please verify again? If you are still not able to get it
>>>> working, could you send me direct to my home email adress your WT.INI file?
>>>>
>>>> Thanks and 73,
>>>>
>>> My TT Orion II doesn't work that way either!
>>> Setup: Orion II and microKeyer (firmware 3.2 and USB device router ver.
>>> 4.0.10)
>>>
>>> 73
>>> Joe, DL4CF
>> I am also using a microKeyer (same firmware & software). Maybe there is a clue 
>> there.
> 
> I don't think that it can be a microKeyer issue but I'll keep that in 
> mind and do some tests with mine. BTW, have you got two microKeyer (one 
> for each radio)?
> 
> Is there someone here who has a microKeyer and doesn't experience the 
> same result with the S&P mode?
> 
> I have tested your WT.INI here and I confirm that everything is working 
> as expected with me. I didn't change anything in your settings except 
> the port the radio is connected to. In S&P mode (which was activated in 
> your WT.INI), as soon as I change frequency by greater than 300 Hz, the 
> callsign is transfered into the bandmap and the callsign field is wiped. 
> I'm afraid we are facing to a very strange situation!
> 
> Also tried the WT.INI file I got from Joe, DL4CF. It worked well also as 
> soon as I have activated "Wipe QSO", "Populate Bandmap" and the S&P 
> mode. None of these settings was active in the Joe's WT.INI so I don't 
> know if he was in fact trying this feature with or without the feature 
> enabled.
> 
> I would be glad to receive other reports (working or not working ones) 
> in order to help investigatiing!
> 
> Thanks,
> 
> 73,

No problem here, with Microham MK2R+, ic756pro3 and Tentec Omni6. Apart 
on the second radio window when the option "Wipe the QSO" is checked the 
call is not wiped out. All works as expected on the first radio and main 
entry window.

73 Philippe - F6IFY