[WT-support] S&P V3.14.0

[Baker]

Hi Olivier,

It does not seem to have anything to do with the microKeyer.

I ran my K2 on COM 1 (real port) and COM 6 (virtual port), exactly the same 
results.

I then tried changing the mode from SSB to CW, and everything worked.

Maybe I am the only one to use S&P on SSB !

73
Stewart G3RXQ


> I don't think that it can be a microKeyer issue but I'll keep that in
> mind and do some tests with mine. BTW, have you got two microKeyer (one
> for each radio)?
>
> Is there someone here who has a microKeyer and doesn't experience the
> same result with the S&P mode?
>
> I have tested your WT.INI here and I confirm that everything is working
> as expected with me. I didn't change anything in your settings except
> the port the radio is connected to. In S&P mode (which was activated in
> your WT.INI), as soon as I change frequency by greater than 300 Hz, the
> callsign is transfered into the bandmap and the callsign field is wiped.
> I'm afraid we are facing to a very strange situation!
>
> Also tried the WT.INI file I got from Joe, DL4CF. It worked well also as
> soon as I have activated "Wipe QSO", "Populate Bandmap" and the S&P
> mode. None of these settings was active in the Joe's WT.INI so I don't
> know if he was in fact trying this feature with or without the feature
> enabled.
>
> I would be glad to receive other reports (working or not working ones)
> in order to help investigatiing!
>
> Thanks,
>
> 73,