[WT-support] Swap the frequency on both Radios.

[Dani EA5FV]

You understood the idea, thank you.
73 de Dani EA5FV
ea5fv at lynxdxg.com


----- Original Message ----- 
From: "Matt IZ3EYZ" <iz3eyz at virgilio.it>
To: <support at win-test.com>
Sent: Sunday, October 15, 2006 4:05 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.


> The "Swap freq. on both radios" feature was mainly a WRTC issue. I 
> remember the WRTC special ver. had "CTRL+S" as assigned shortcut key.
> The "swapping"  was working even through a network, in other words each 
> radio was connected to "his" related PC. Of course it was running even if 
> both radios were connected to a single PC for SO2R purposes.
>
> Actually I have no radios with me but it seems no shortcut key is assigned 
> to the "swap freq. on both radios"  feature, neither "CTRL+S" is working.
>
> It seems, reading both EA5FV and CT1ILT scenarios, they need the "swap 
> freq. on both radios" issue and not the "swap radios" (aka shortcut key 
> "*") which actually just change the active radio.
>
> Of course, as reported, typing "SWAP" in the callsign field you do the 
> "swap. freq. on both radios".
>
> 73
>
> Matt.EYZ
>
> ----- Original Message ----- 
> From: José Nunes CT1BOH
> To: support at win-test.com
> Sent: Sunday, October 15, 2006 3:40 PM
> Subject: Re: [WT-support] Swap the frequency on both Radios.
>
>
> actually the * key just changes the focus between primary and secondary 
> radio. Primary becomes secondary and vice versa.
> If radio1 is the primary radio, after pushing the * key then radio2 
> becomes the primary radio, and no change in frequencies.
>
> Swap adds a little more functionality
>
> After typing swap, the frequency of the primary radio is swapped with the 
> secondary radio frequency, and this radio now becomes the primary radio
>
> Imagine radio2 is primary radio on 21025 and radio1 is on 7001
> After typing swap then primary radio is radio1 on 21025. Secondary radio 
> is now radio2 on 7001
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt> wrote:
> Hummm, well that I didnt know!
>
> Tnx
>
> Fil
>
> ----- Original Message ----- 
> From: José Nunes CT1BOH
> To: support at win-test.com
> Sent: Sunday, October 15, 2006 2:29 PM
> Subject: Re: [WT-support] Swap the frequency on both Radios.
>
>
> or type in the callsign field "SWAP"
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com > wrote:
> It's already there...
>
> Just push then "*" key in the numbers keypad, far righ end of a keyboard
>
> |Num lock|    | / |    |*|     |-|
>
>
> or Redefine any key to your liking
>
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote:
> Hi all,
>
> I agree with Dani, a swapping radios with Keybord would be very nice! Much 
> easier!
>
> 73's Filipe CT1ILT
>
>
> ----- Original Message ----- 
> From: Dani EA5FV
> To: Wintest_reflector
> Sent: Sunday, October 15, 2006 2:37 AM
> Subject: [WT-support] Swap the frequency on both Radios.
>
>
> Hello to all,
> one of the possibilities that offers the Swap the frequency on both 
> radios, is to be able to work with a single automatic amplifier (for 
> example ACOM 2000A) for two radios. With Wintest and EZMaster this is 
> possible.
> The panorama is the following one:
> - Radio1 running (high power)
> - Radio2 looks for multipliers (low power)
> If Radio2 locates a multiplier you try to work him, but if it becomes 
> hard. It is the moment to make
> Swap WinTest and EZMaster make all the changes of frequencies and 
> antennas. The amplifier you
> it adjusted automatically to the antenna of Radio2, you work the 
> multiplier (now with power), while Radio1 continues calling in low power 
> maintaining busy its frequency (nobody took off it). When you work the 
> multiplier with Radio2, make new Swap and Radio1 it continued in running 
> with high power, you continued looking for multipliers for Radio2.
> Now single lack to be able to make Swap the frequency on both radios with 
> the keyboard.  WinTest makes the Swap with the mouse going by 
> MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very 
> good to make it directly from the KEYBOARD, pressing a combination of keys 
> for example Ctrl+S.
>
> 73 de Dani EA5FV
> ea5fv at lynxdxg.com
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>