[WT-support] Swap the frequency on both Radios.

[Braco OE1EMS]

is there any reason why primary and secondary window are different?
why we need 2nd window?
just to change the color of logging windows will be good enough
to see which radio is logging!

73
ems




----- Original Message ----- 
From: "Matt IZ3EYZ" <iz3eyz at virgilio.it>
To: <support at win-test.com>
Sent: Sunday, October 15, 2006 4:05 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.


> The "Swap freq. on both radios" feature was mainly a WRTC issue. I 
> remember the WRTC special ver. had "CTRL+S" as assigned shortcut key.
> The "swapping"  was working even through a network, in other words each 
> radio was connected to "his" related PC. Of course it was running even if 
> both radios were connected to a single PC for SO2R purposes.
>
> Actually I have no radios with me but it seems no shortcut key is assigned 
> to the "swap freq. on both radios"  feature, neither "CTRL+S" is working.
>
> It seems, reading both EA5FV and CT1ILT scenarios, they need the "swap 
> freq. on both radios" issue and not the "swap radios" (aka shortcut key 
> "*") which actually just change the active radio.
>
> Of course, as reported, typing "SWAP" in the callsign field you do the 
> "swap. freq. on both radios".
>
> 73
>
> Matt.EYZ
>
> ----- Original Message ----- 
> From: José Nunes CT1BOH
> To: support at win-test.com
> Sent: Sunday, October 15, 2006 3:40 PM
> Subject: Re: [WT-support] Swap the frequency on both Radios.
>
>
> actually the * key just changes the focus between primary and secondary 
> radio. Primary becomes secondary and vice versa.
> If radio1 is the primary radio, after pushing the * key then radio2 
> becomes the primary radio, and no change in frequencies.
>
> Swap adds a little more functionality
>
> After typing swap, the frequency of the primary radio is swapped with the 
> secondary radio frequency, and this radio now becomes the primary radio
>
> Imagine radio2 is primary radio on 21025 and radio1 is on 7001
> After typing swap then primary radio is radio1 on 21025. Secondary radio 
> is now radio2 on 7001
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt> wrote:
> Hummm, well that I didnt know!
>
> Tnx
>
> Fil
>
> ----- Original Message ----- 
> From: José Nunes CT1BOH
> To: support at win-test.com
> Sent: Sunday, October 15, 2006 2:29 PM
> Subject: Re: [WT-support] Swap the frequency on both Radios.
>
>
> or type in the callsign field "SWAP"
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com > wrote:
> It's already there...
>
> Just push then "*" key in the numbers keypad, far righ end of a keyboard
>
> |Num lock|    | / |    |*|     |-|
>
>
> or Redefine any key to your liking
>
>
> 73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote:
> Hi all,
>
> I agree with Dani, a swapping radios with Keybord would be very nice! Much 
> easier!
>
> 73's Filipe CT1ILT
>
>
> ----- Original Message ----- 
> From: Dani EA5FV
> To: Wintest_reflector
> Sent: Sunday, October 15, 2006 2:37 AM
> Subject: [WT-support] Swap the frequency on both Radios.
>
>
> Hello to all,
> one of the possibilities that offers the Swap the frequency on both 
> radios, is to be able to work with a single automatic amplifier (for 
> example ACOM 2000A) for two radios. With Wintest and EZMaster this is 
> possible.
> The panorama is the following one:
> - Radio1 running (high power)
> - Radio2 looks for multipliers (low power)
> If Radio2 locates a multiplier you try to work him, but if it becomes 
> hard. It is the moment to make
> Swap WinTest and EZMaster make all the changes of frequencies and 
> antennas. The amplifier you
> it adjusted automatically to the antenna of Radio2, you work the 
> multiplier (now with power), while Radio1 continues calling in low power 
> maintaining busy its frequency (nobody took off it). When you work the 
> multiplier with Radio2, make new Swap and Radio1 it continued in running 
> with high power, you continued looking for multipliers for Radio2.
> Now single lack to be able to make Swap the frequency on both radios with 
> the keyboard.  WinTest makes the Swap with the mouse going by 
> MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very 
> good to make it directly from the KEYBOARD, pressing a combination of keys 
> for example Ctrl+S.
>
> 73 de Dani EA5FV
> ea5fv at lynxdxg.com
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support