[WT-support] Swap the frequency on both Radios.

[Matt IZ3EYZ]

The "Swap freq. on both radios" feature was mainly a WRTC issue. I remember 
the WRTC special ver. had "CTRL+S" as assigned shortcut key.
The "swapping"  was working even through a network, in other words each 
radio was connected to "his" related PC. Of course it was running even if 
both radios were connected to a single PC for SO2R purposes.

Actually I have no radios with me but it seems no shortcut key is assigned 
to the "swap freq. on both radios"  feature, neither "CTRL+S" is working.

It seems, reading both EA5FV and CT1ILT scenarios, they need the "swap freq. 
on both radios" issue and not the "swap radios" (aka shortcut key "*") which 
actually just change the active radio.

Of course, as reported, typing "SWAP" in the callsign field you do the 
"swap. freq. on both radios".

73

Matt.EYZ

----- Original Message ----- 
From: José Nunes CT1BOH
To: support at win-test.com
Sent: Sunday, October 15, 2006 3:40 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.


actually the * key just changes the focus between primary and secondary 
radio. Primary becomes secondary and vice versa.
If radio1 is the primary radio, after pushing the * key then radio2 becomes 
the primary radio, and no change in frequencies.

Swap adds a little more functionality

After typing swap, the frequency of the primary radio is swapped with the 
secondary radio frequency, and this radio now becomes the primary radio

Imagine radio2 is primary radio on 21025 and radio1 is on 7001
After typing swap then primary radio is radio1 on 21025. Secondary radio is 
now radio2 on 7001

73
José
CONTEST CT1BOH http://www.qsl.net/ct1boh



On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt> wrote:
Hummm, well that I didnt know!

Tnx

Fil

----- Original Message ----- 
From: José Nunes CT1BOH
To: support at win-test.com
Sent: Sunday, October 15, 2006 2:29 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.


or type in the callsign field "SWAP"

73
José
CONTEST CT1BOH http://www.qsl.net/ct1boh



On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com > wrote:
It's already there...

Just push then "*" key in the numbers keypad, far righ end of a keyboard

|Num lock|    | / |    |*|     |-|


or Redefine any key to your liking


73
José
CONTEST CT1BOH http://www.qsl.net/ct1boh



On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote:
Hi all,

I agree with Dani, a swapping radios with Keybord would be very nice! Much 
easier!

73's Filipe CT1ILT


----- Original Message ----- 
From: Dani EA5FV
To: Wintest_reflector
Sent: Sunday, October 15, 2006 2:37 AM
Subject: [WT-support] Swap the frequency on both Radios.


Hello to all,
one of the possibilities that offers the Swap the frequency on both radios, 
is to be able to work with a single automatic amplifier (for example ACOM 
2000A) for two radios. With Wintest and EZMaster this is possible.
The panorama is the following one:
- Radio1 running (high power)
- Radio2 looks for multipliers (low power)
If Radio2 locates a multiplier you try to work him, but if it becomes hard. 
It is the moment to make
Swap WinTest and EZMaster make all the changes of frequencies and antennas. 
The amplifier you
it adjusted automatically to the antenna of Radio2, you work the multiplier 
(now with power), while Radio1 continues calling in low power maintaining 
busy its frequency (nobody took off it). When you work the multiplier with 
Radio2, make new Swap and Radio1 it continued in running with high power, 
you continued looking for multipliers for Radio2.
Now single lack to be able to make Swap the frequency on both radios with 
the keyboard.  WinTest makes the Swap with the mouse going by 
MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very 
good to make it directly from the KEYBOARD, pressing a combination of keys 
for example Ctrl+S.

73 de Dani EA5FV
ea5fv at lynxdxg.com




_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support




No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support










_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support




No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support








_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support