[WT-support] Swap the frequency on both Radios.

[Dani EA5FV]

Ok Jose,  
all this that you explain I understand it.  
But what I request is to make the Swap from the keyboard, not from the  MENU/COMANDS/SWAP THE FREQUENCY.........  through the mouse.  
Don't I find as making it, you if?. 

73 de Dani EA5FV
ea5fv at lynxdxg.com
 

  ----- Original Message ----- 
  From: José Nunes CT1BOH 
  To: support at win-test.com 
  Sent: Sunday, October 15, 2006 3:40 PM
  Subject: Re: [WT-support] Swap the frequency on both Radios.


  actually the * key just changes the focus between primary and secondary radio. Primary becomes secondary and vice versa.
  If radio1 is the primary radio, after pushing the * key then radio2 becomes the primary radio, and no change in frequencies.

  Swap adds a little more functionality

  After typing swap, the frequency of the primary radio is swapped with the secondary radio frequency, and this radio now becomes the primary radio

  Imagine radio2 is primary radio on 21025 and radio1 is on 7001
  After typing swap then primary radio is radio1 on 21025. Secondary radio is now radio2 on 7001

  73
  José
  CONTEST CT1BOH http://www.qsl.net/ct1boh


   
  On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt> wrote: 
    Hummm, well that I didnt know!

    Tnx 

    Fil

      ----- Original Message ----- 
      From: José Nunes CT1BOH 
      To: support at win-test.com 
      Sent: Sunday, October 15, 2006 2:29 PM
      Subject: Re: [WT-support] Swap the frequency on both Radios.

       
      or type in the callsign field "SWAP"

      73
      José
      CONTEST CT1BOH http://www.qsl.net/ct1boh


       
      On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com > wrote: 
        It's already there...

        Just push then "*" key in the numbers keypad, far righ end of a keyboard

        |Num lock|    | / |    |*|     |-|


        or Redefine any key to your liking


        73
        José
        CONTEST CT1BOH http://www.qsl.net/ct1boh


         
        On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote: 
          Hi all,

          I agree with Dani, a swapping radios with Keybord would be very nice! Much easier!

          73's Filipe CT1ILT


            ----- Original Message ----- 
            From: Dani EA5FV 
            To: Wintest_reflector 
            Sent: Sunday, October 15, 2006 2:37 AM
            Subject: [WT-support] Swap the frequency on both Radios.

             
            Hello to all,  
            one of the possibilities that offers the Swap the frequency on both radios, is to be able to work with a single automatic amplifier (for example ACOM 2000A) for two radios. With Wintest and EZMaster this is possible.  
            The panorama is the following one:  
            - Radio1 running (high power)  
            - Radio2 looks for multipliers (low power)  
            If Radio2 locates a multiplier you try to work him, but if it becomes hard. It is the moment to make  
            Swap WinTest and EZMaster make all the changes of frequencies and antennas. The amplifier you   
            it adjusted automatically to the antenna of Radio2, you work the multiplier (now with power), while Radio1 continues calling in low power maintaining busy its frequency (nobody took off it). When you work the multiplier with Radio2, make new Swap and Radio1 it continued in running with high power, you continued looking for multipliers for Radio2.  
            Now single lack to be able to make Swap the frequency on both radios with the keyboard.  WinTest makes the Swap with the mouse going by MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very good to make it directly from the KEYBOARD, pressing a combination of keys for example Ctrl+S. 

            73 de Dani EA5FV
            ea5fv at lynxdxg.com



--------------------------------------------------------------------


            _______________________________________________
            Support mailing list
            Support at win-test.com
            http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



--------------------------------------------------------------------


            No virus found in this incoming message.
            Checked by AVG Free Edition.
            Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006












          _______________________________________________
          Support mailing list
          Support at win-test.com 
          http://www.f5mzn.org/cgi-bin/mailman/listinfo/support 









--------------------------------------------------------------------------


      _______________________________________________
      Support mailing list
      Support at win-test.com
      http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



--------------------------------------------------------------------------


      No virus found in this incoming message.
      Checked by AVG Free Edition.
      Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006






    _______________________________________________
    Support mailing list
    Support at win-test.com 
    http://www.f5mzn.org/cgi-bin/mailman/listinfo/support







------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20061015/bf20e037/attachment.htm