[WT-support] about intelligent quick QSL

[Jorge Diez - CX6VM]

OK Olivier,

Sounds better, and I can play with the seconds easily. Fill in with 1
second when I want to send always TU CX6VM, and 60, 90 or 120 according
to the pile up.

73,
Jorge

-----Mensaje original-----
De: support-bounces at win-test.com [mailto:support-bounces at win-test.com]
En nombre de Olivier Le Cam
Enviado el: Martes, 07 de Noviembre de 2006 11:55 a.m.
Para: support at win-test.com
Asunto: Re: [WT-support] about intelligent quick QSL


Jorge Diez - CX6VM a écrit :
> Hi,
> 
> Is there any command to activate/desactivate the intelligent quick QSL

> feature, other than write or erase $QQSLC in the + CW message?
> 
> Just to use this "short" option to start sending always TU CX6VM when 
> the pile up start going down.

Not really except if you are operating SO2R. If so, you can have 
different scenarios, one with the Quick QSL enabled and the other
without.

If you don't operate SO2R, the best way would be to use the Quick QSL 
based on elapsed time.

HTH

73,
-- 
Olivier / f5mzn
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support