[WT-support] about intelligent quick QSL

[Olivier Le Cam]

Jorge Diez - CX6VM a écrit :
> Hi,
> 
> Is there any command to activate/desactivate the intelligent quick QSL
> feature, other than write or erase $QQSLC in the + CW message?
> 
> Just to use this "short" option to start sending always TU CX6VM when
> the pile up start going down.

Not really except if you are operating SO2R. If so, you can have 
different scenarios, one with the Quick QSL enabled and the other without.

If you don't operate SO2R, the best way would be to use the Quick QSL 
based on elapsed time.

HTH

73,
-- 
Olivier / f5mzn