[WT-support] Bug on TX frequency during split operations in ADIF file

[Olivier F5MZN]

Tim Ellison wrote:
> 1.) Make a database structure change for recording the FREQ_RX (as 
> defined by ADIF version 2) in addition to the FREQ during a contest.  
> Also add an additional field for BAND_RX (also defined by ADIF version 
> 2) for split band operation.
> 
> 2.) If rig control is active, WT "knows" when you are working split 
> (split is displayed in VFO B window).  If working split, record the RX 
> frequency as the one from VFO A and the TX frequency as VFO B.  Also 
> update the BAND_RX field with the correct band derived from the FREQ_RX 
> value.
> 
> 3.) If SPLIT is not active, or there is no rig control, record the 
> frequency captured for the QSO (VFO A?) in both the RX and TX frequency 
> fields.  Also the BAND and BAND_RX fields should be updated appropriately.
> 
> 4.) During ADIF export enter the TX frequency in the ADIFv2 FREQ field 
> and the RX frequency in the ADIFv2 FREQ_TX field.  Also add the ADIFv2 
> BAND_RX to the ADIF export file.

Thank you for the suggestion which sounds smart. The QSO structur in WT 
v2 is now quite full of datas and does allow to add an extra field for 
recording both VFOs, but we will consider this for v3.

73,
-- 
Olivier / f5mzn