[WT-support] Win-Test NAQP/SS and sound output

[Laurent HAAS - F6FVY]

Hi Scott

Scott Robbins a écrit :

> The transmit audio output of SSB memories is very high.  I am running the SSB
> meter into the 'red zone' with every message.  Is it that I have the mic input
> too high, the sound card output too high, or maybe some of both?  I can record
> messages OK, they are just too 'hot' when I play them back.

WT uses the Windows sound settings. Adjust them to your convenience.

> Comments about NAQP and ARRL Sweepstakes:

I can only comment abt the NAQP as I wrote this class.

> Alt-M in NAQP brings up DXCC multipliers.  It needs to bring up U.S. states and
> Canada provinces and then show which are needed on 10, 15, 20, 40, 80, 160.

Alt-Z should display what you're looking for.

> NAQP should not allow logging an incomplete QSO unless it's a non-A, K, N, W or
> VE, VO, VY call or the entrants own callsign is typed on the callsign cursor. 
> It is OK for incomplete calls for DX stations to be logged as DX stations can
> be worked for QSO credit but not multipliers.

I will check that...

> Alternate logging for mults allowed for Canada in NAQP?  TR-Log allows "VE3" or
> "ON" to be used for Ontario, for example.

Check STATES.DAT and add what you want to your convenience.

> All contests: I can't get the TAB key to move among each entry window.  I can
> do this with the space bar but TAB doesn't do it.  Is it supposed to?

Definitely. The Tab key is only used to jump to sent rpt and send rpt. 
CT inheriting.

> All contests:  I am unable to use Alt-1 and Alt-2 or the * key to toggle the
> active radio.  Double-clicking VFO A in the bandmap box for radio 1 or radio 2
> will allow switching.  This is WITHOUT rigs actually connected (how I
> occasionally operate, no rig control from software, kind of like some older
> rigs are used with...)
> 
> Am I doing something wrong? 

The Alt-1 and Alt-2 shortcuts are deprecated since the arrival of the 
Partner window. BTW, I don't know what version you're using, but the 
latest version is here :

http://download.win-test.com/wt-3.0.7.exe [Full, 3.7 MB]
http://download.win-test.com/wt-3.0.7-update.exe [Update, 2.1 MB]

Do you use the numpad * ? You must be in Operating / Technique / SO2R or 
advanced SO2R.

73

Larry - F6FVY