[WT-support] wintest two instances

[VE2RYY]

Hello Oliver
Thanks very much it is working great,
Now I have anotherthing....
I have two MARK v Fiels.
On the first instance my CAT is working good...
On the second instance I have the same setup for the cat but on COM2 instead
of COM1 on first instance....
I see the CAT light blinking on the MP radio....but I cannot have the
selected band on the second instance of WT....
I don't know where could be the problem....
Same config.. COM 1....4800 8 n 2       (for radio 1) on fisrt instance of
WT
                       Com 2     4800 8 n2       (for radio2) on the second
instance of WT.


What AM i missing in here???
Regards
NOEL

----- Original Message -----
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Wednesday, July 05, 2006 13:06
Subject: Re: [WT-support] wintest two instances


> VE2RYY wrote:
> > Hello Group.
> > I am testing wintest vers 3 with two instances of WT on the same
> > computer...and two monitors
> > Both instances are on the same log.....
> > I have one question..
> > when I log a call in the instance nr1, i cannot see this call entered on
> > the second instance.
> > When I close the second instance, an d I do reopen it, of course I see
> > the call I have logged on the other instance....
> > I would like to know if it is possible to make both instances see what
> > is logged on the first or the second instances????without closing and
> > reopening ....
>
> Hi Noël,
>
> You sould not open both instances on the same log (ie use different file
> name of each ionstance).
>
> If you want to share the logged QSO between different instances (or even
> computers), you just have to enable networking (menu Options | Interface
> configuration). For two instances on the same computer, use
> 127.255.255.255 as broadcast address (this will work as soon as you
> don't want to have different computers in the network).
>
> HTH
>
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>