[WT-support] CW Messages

[Tom Wylie]

Just home from Freidrichshaven and met up with Laurent and Oliver and also 
Jozef of Microkeyer.   All wonderful guys and all very helpfull and 
friendly.   many thanks to you all and you deserve every success with your 
products.


73

Tom
GM4FDM
----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Sunday, June 26, 2005 11:04 PM
Subject: Re: [WT-support] CW Messages


> Hi Raymond
>
> Sorry for late answering but we were at F'Hafen hamfest this week-end...
>
>> Using winkey incorporated in microham keyer.
>> In the cw messages the message in F5 $LOGGEDCALL does
>> not send the current call that you have typed in on
>> its own it starts to send the first character then
>> stops unless you hit F2 for the report .
>
> I'm not sure I got what you want, and if there is a problem or not...
>
> Let's assume you hear FY5KE. The usual sequence is :
>
> - You enter the callsign
> - You hit the Insert key
> - WT will transmit the callsign and report
>
> If you decode faster than type (like many ops), you can :
>
> - Start entering the callsign (let's say FY5)
> - Hit Insert
> - WT starts transmitting the callsign
> - You can enter the rest of the callsign (KE)
> - WT will continue to send the letters on the fly. We call it "type 
> ahead".
>
> I don't have a microKeyer handy, so I can't confirm there is a problem or 
> not with that. Please, give us some days to check it.
>
> > If you hit F5 with no current call in yes it sends the
> > last logged call
>
> This is the normal behaviour. This way, even after validating a QSO, you 
> can resend your report to the station you've just work if it needs it 
> again.
>
> 73
>
> Larry - F6FVY
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>