[Wrtc] Roadmap v1.0

[Toni Lindén]

Hi all!

This where "no poll" feature is needed. If one radio is connectected to two
EZMasters and PC's, same time polling from PC A & PC B will mess up the CAT
connection of radio.

73 de Toni

2006/5/14, Olivier F5MZN <olecam at f5mzn.org>:
>
> Tõnno Vähk wrote:
> > HI Oliver,
> >
> > swap:
> >
> > Actually I will have both radios connected to A computer through EZM I
> believe, so present SWAP commenad is OK. The B computer does not need to
> drive the CAT of Radio B is Operator A is doing the switching. I thought I
> will just share the passive CAT signal from Radio B with T connector to
> Computer B so that he can fill the bandmap.
>
> You should carefully check that frames sent by radio B to computer A can
> be passively linked to computer B as well. Due to the protocols and
> check controls done by Win-Test, this can maybe work with some radios,
> but it won't work with most of them.
>
> 73 de Olivier / f5mzn
> --
> A: Because it messes up the order in which people normally read text.
> Q: Why is it such a bad thing?
> A: Top-posting.
> Q: What is the most annoying thing on usenet and in e-mail?
> _______________________________________________
> Wrtc mailing list
> Wrtc at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/wrtc
>



-- 

-.-. --.-   -.. .   --- .... ..--- ..- .-
Name:
Toni Lindén, OH2UA

Adr:
Kylätie 22A5
FIN 00320 Helsinki
Finland

Phone:
+358505867161

E-mail:
oh2ua at oh2u.com
.-.-.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/wrtc/attachments/20060514/66c0a275/attachment.html