[WT-support] IC705 with WT via remote suite

[fabio.scherrer at bluewin.ch]

Hello Bob
Thanks for the prompt reply. I followed carefully your instructions and now it works! Thanks very much for your support, as always very appreciated.
73 de Fabio HB9FAP
---- Messaggio originale ----
Da : n6tv at arrl.net
Data : 05/01/2022 - 23:33 (OE)
A : support at win-test.com, fabio.scherrer at bluewin.ch
Oggetto : Re: [WT-support] IC705 with WT via remote suite
 When using OmniRig, you cannot transmit CW via DTR pin keying.
 
  
 
 
  You can send CW via CI-V commands using the #ICOMPLAY examples in IcomScripts.zip, which you may download from 
  https://bit.ly/wtscripts .  This works with OmniRig or the native IC-705 support built-in to WT 4.38.
 
 
  
 
 
  Follow the IcomScripts.zip Readme file for instructions.  There's a .smsg file you can load into the Win-Test messages dialog to set up examples of keying via CI-V command.  But there are limitations compared to DTR keying (no callsign type-ahead feature).
 
 
  
 
 
  
   
    73,
    
     Bob, N6TV
    
   
  
  
 
 
  On Wed, Jan 5, 2022 at 1:38 PM 
  fabio.scherrer at bluewin.ch <
  fabio.scherrer at bluewin.ch> wrote:
  
 
 
  
   Hello there and HNY to everyone
  
  
   I am trying to setup a remote connection as follow:
  
  
   TRX at remote place IC705, remote utility is win4icomsuite, WT as contest logger, supposed also to transmit. I am not able to set properly WT. I tried to do it by using omnirig and it seems to work (when I change band/frequency on WT or I click on a clusterspot it reacts correctly on the radio and viceversa), but I am not able to TX from WT (F1, F2 and so on do not work). A said, I have set Omnirig as transceiver in WT interface settings. Is there anybody who can help me to find out how to remote TX from WT?
  
  
   Thanks in advance for any help
  
  
   73 de Fabio HB9FAP
   
  
  
     
   
  _______________________________________________
  
 Support mailing list
  
  support at win-test.com
  
  http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
  
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20220106/f08f5da3/attachment.html>