[WT-support] Problems with Miroham MKII WK and WT

Ricardo Navarrete ricardoea4zk at gmail.com
Fri Nov 26 12:57:03 CET 2021


In fact I have tested with N1MM and DXLog with oiptimal results... so maybe
there is a little gap in Win-test with WinKey management???


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

El vie, 26 nov 2021 a las 12:54, Ricardo Navarrete (<ricardoea4zk at gmail.com>)
escribió:

> Hello Laurent
> Thanks for fast reply, there isn't 1st extension and compensation in
> CW/WinKey tab on my Microham Router
>
>
>
> El vie, 26 nov 2021 a las 12:50, Laurent HAAS - F6FVY (<f6fvy at free.fr>)
> escribió:
>
>> Hi Rick
>>
>> Le 26/11/2021 à 12:43, Ricardo Navarrete a écrit :
>>
>> > Last LZ contest I experienced a problem with winkey and Wintest, I need
>> > to test with N1MM and DXLog. The problem is with my spots in reverse
>> > beacon network and skimmers. When I'm cqing most of the skimmers spot
>> me
>> > as EA4M but there are few spotting me as TA4M , well I tried with some
>> > more different callsigns (EA ham radio friends) and I got the same
>> > issue. I configured Win-test to use cw through DTR instead of using
>> > winkey and everything went fine.
>> >
>> > Any thought??
>>
>> Check if the "1st extension" (and the "Keying compensation") in the
>> WinKey tab of the MicroHAM router is set to 0 ms.
>>
>> 73
>>
>> Larry - F6FVY
>>
>> --
>>
>> All of humanity's problems stem from man's inability
>> to sit quietly in a room alone.
>>
>> Blaise Pascal, Pensées
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
>
> --
> Ricardo Navarrete López
> ricardoea4zk at gmail.com
>
> Este envío es confidencial y está destinado únicamente a la persona a la
> que ha sido enviado. Puede contener información privada y confidencial. Si
> usted no es el destinatario al que ha sido remitida, no puede copiarla,
> distribuirla ni emprender con ella ningún tipo de acción. Si cree que lo ha
> recibido por error, por favor, notifíquelo al remitente.This transmission
> is confidential and intended solely for the person to whom it is addressed.
> It may contain privileged and confidential information. If you are not the
> intended recipient, you should not copy, distribute or take any action in
> reliance on it. If you believe that you have received this transmission in
> error, please notify the sender.
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Libre
> de virus. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> <#m_7198952679784909487_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>


-- 
Ricardo Navarrete López
ricardoea4zk at gmail.com

Este envío es confidencial y está destinado únicamente a la persona a la
que ha sido enviado. Puede contener información privada y confidencial. Si
usted no es el destinatario al que ha sido remitida, no puede copiarla,
distribuirla ni emprender con ella ningún tipo de acción. Si cree que lo ha
recibido por error, por favor, notifíquelo al remitente.This transmission
is confidential and intended solely for the person to whom it is addressed.
It may contain privileged and confidential information. If you are not the
intended recipient, you should not copy, distribute or take any action in
reliance on it. If you believe that you have received this transmission in
error, please notify the sender.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20211126/e1a4e2ba/attachment-0001.html>


More information about the Support mailing list