[WT-support] K3NG Keyer

Bob Wilson, N6TV n6tv at arrl.net
Wed Jan 27 21:07:12 CET 2021


Does the K3NG keyer present an FTDI USB to Serial adapter to Windows?  If
so, there are two settings to change in the Advanced Menu to stop Windows
from keying the DTR and RTS pins every time you insert the device.  This
applies to ALL FTDI USB-to-Serial adapters.

See this presentation, *slides 26 to 28*, also linked from my QRZ.com page
<https://www.qrz.com/db/N6TV>:

Everything You Need to Know About USB and Serial Interfaces
<https://bit.ly/USBserial2020>, presented at 2020 Dayton CTU via Zoom

   - Watch YouTube recording of this presentation here
   <https://www.youtube.com/watch?v=fEEUpsWUtAA&feature=youtu.be&t=8127>.

Then maybe you don't need the capacitor?

73,
Bob, N6TV


On Wed, Jan 27, 2021 at 10:43 AM Maciek SQ6MS <sq6ms at o2.pl> wrote:

> Hi Franck.
>
> I`m glad to hear good news from you. I spend quite some time trying to
> solve this as well :) I built probably 5 or more K3NG keyers in
> different variants - and with this simple capacitor mod win-key
> emulation is working without problem.
>
> Issue is with the USB port. Each time when software is trying to
> initialize it (e.g. when you are opening logging program) reset pin is
> cycled few times on/off and that is causing initialisation problem.
>
> Don`t forget to remove this capacitor if you want to program the arduino
> board again.
>
> --
> Vy73`s de Maciek SQ6MS/F4VSQ
>
> W dniu 27/01/2021 o 18:25, Franck pisze:
> > Hi Maciek & All,
> > This fixed my problem Winkey is now detected.
> >
> > Thanks & 73 de Franck, F4CIB
> >
> > ----- Mail original -----
> > De: "Maciek SQ6MS" <sq6ms at o2.pl>
> > À: support at win-test.com
> > Envoyé: Mardi 26 Janvier 2021 18:34:46
> > Objet: Re: [WT-support] K3NG Keyer
> >
> > Hi
> >
> > For Win-Key emulation If you are using Arduino Nano or other board
> > (regardless if it`s original or clone) put 10 to 47uF electrolytic
> > capacitor between RESET and GND pins.
> >
> > For regular use this capacitor should always be connected. Disconnect it
> > if you want to program (uploading new sketch) the board.
> >
> > Hope this will help. Good Luck !
> >
>
> --
> Cet email a fait l'objet d'une analyse antivirus par AVG.
> http://www.avg.com
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20210127/43d7506c/attachment.html>


More information about the Support mailing list