[WT-support] K3NG Keyer

[Bob Wilson, N6TV]

 Did you set COM10's Device name to *WinKey* in Win-Test Interface
Configuration?  Did you set the baud rate to 1200 baud?  Just click the
"Use WinKey Defaults" button to set 1200,8,N,2 Handshake, Handshake. and
restart everything.

73,
Bob, N6TV


On Mon, Jan 25, 2021 at 10:31 AM Franck <f4cib at free.fr> wrote:

> Hi All,
> struggling with my K3NG keyer and Win-Test.
>
> I compile K3NG keyer with last up to date firmware (2021-01-24)
> Keyer options used:
> #define FEATURE_COMMAND_LINE_INTERFACE  // Command Line Interface
> functionality
> #define FEATURE_WINKEY_EMULATION    // disabling Automatic Software Reset
> is highly recommended (see documentation)
> #define OPTION_PRIMARY_SERIAL_PORT_DEFAULT_WINKEY_EMULATION  // Use when
> activating both FEATURE_WINKEY_EMULATION and FEATURE_COMMAND_LINE_INTERFACE
> #define OPTION_INCLUDE_PTT_TAIL_FOR_MANUAL_SENDING
> #define OPTION_EXCLUDE_PTT_HANG_TIME_FOR_MANUAL_SENDING
> #define OPTION_WINKEY_STRICT_HOST_OPEN               // require an admin
> host open Winkey command before doing any other commands
> #define OPTION_WINKEY_2_SUPPORT                      // comment out to
> revert to Winkey version 1 emulation
> #define OPTION_WINKEY_INTERRUPTS_MEMORY_REPEAT
> #define OPTION_WINKEY_2_HOST_CLOSE_NO_SERIAL_PORT_RESET  // (Required for
> Win-Test to function)
> #define OPTION_WINKEY_IGNORE_LOWERCASE               // Enable for typical
> K1EL Winkeyer behavior (use for SkookumLogger version 1.10.14 and prior to
> workaround "r" bug)
> #define OPTION_PROG_MEM_TRIM_TRAILING_SPACES         // trim trailing
> spaces from memory when programming in command mode
> #define OPTION_DIT_PADDLE_NO_SEND_ON_MEM_RPT         // this makes dit
> paddle memory interruption a little smoother
> #define OPTION_CW_KEYBOARD_CAPSLOCK_BEEP
> #define OPTION_DO_NOT_SEND_UNKNOWN_CHAR_QUESTION
> #define OPTION_EXCLUDE_EXTENDED_CLI_COMMANDS
> #define OPTION_DISPLAY_MEMORY_CONTENTS_COMMAND_MODE
>
> On Win-Test side, Keyer connected to COM10 set to Winkey 8N2 DTR set
> always to 1, RTS always to 0 (tried as well default which are handshake for
> both)
> Options, Winkey configuration unchanged (i tried also winkey v2 features
> enabled):
> All unticked but paddle watchdog, Iambic A, PTT, 752Hz, tail&lead 50ms,
> fixed tail, synchronized by WT only
>
> And i got Winkey Device init Error on the status area
>
> Can anyone share with me his settings ?
>
> 73 de Franck, F4CIB
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20210125/8b87d5fe/attachment.html>