[WT-support] K3NG Keyer

[Franck]

Hi All,
struggling with my K3NG keyer and Win-Test.

I compile K3NG keyer with last up to date firmware (2021-01-24)
Keyer options used:
#define FEATURE_COMMAND_LINE_INTERFACE  // Command Line Interface functionality
#define FEATURE_WINKEY_EMULATION    // disabling Automatic Software Reset is highly recommended (see documentation)
#define OPTION_PRIMARY_SERIAL_PORT_DEFAULT_WINKEY_EMULATION  // Use when activating both FEATURE_WINKEY_EMULATION and FEATURE_COMMAND_LINE_INTERFACE 
#define OPTION_INCLUDE_PTT_TAIL_FOR_MANUAL_SENDING
#define OPTION_EXCLUDE_PTT_HANG_TIME_FOR_MANUAL_SENDING
#define OPTION_WINKEY_STRICT_HOST_OPEN               // require an admin host open Winkey command before doing any other commands
#define OPTION_WINKEY_2_SUPPORT                      // comment out to revert to Winkey version 1 emulation
#define OPTION_WINKEY_INTERRUPTS_MEMORY_REPEAT
#define OPTION_WINKEY_2_HOST_CLOSE_NO_SERIAL_PORT_RESET  // (Required for Win-Test to function)
#define OPTION_WINKEY_IGNORE_LOWERCASE               // Enable for typical K1EL Winkeyer behavior (use for SkookumLogger version 1.10.14 and prior to workaround "r" bug)
#define OPTION_PROG_MEM_TRIM_TRAILING_SPACES         // trim trailing spaces from memory when programming in command mode
#define OPTION_DIT_PADDLE_NO_SEND_ON_MEM_RPT         // this makes dit paddle memory interruption a little smoother
#define OPTION_CW_KEYBOARD_CAPSLOCK_BEEP
#define OPTION_DO_NOT_SEND_UNKNOWN_CHAR_QUESTION
#define OPTION_EXCLUDE_EXTENDED_CLI_COMMANDS
#define OPTION_DISPLAY_MEMORY_CONTENTS_COMMAND_MODE

On Win-Test side, Keyer connected to COM10 set to Winkey 8N2 DTR set always to 1, RTS always to 0 (tried as well default which are handshake for both)
Options, Winkey configuration unchanged (i tried also winkey v2 features enabled):
All unticked but paddle watchdog, Iambic A, PTT, 752Hz, tail&lead 50ms, fixed tail, synchronized by WT only

And i got Winkey Device init Error on the status area

Can anyone share with me his settings ?

73 de Franck, F4CIB