[WT-support] Fwd: Run & SP

[Jean-Pierre Rausch]

Thank you Bob is working now

73 de ON3LX Jean-Pierre

Le dim. 10 nov. 2019 à 01:28, Bob Wilson, N6TV <n6tv at arrl.net> a écrit :

> Are you asking about voice keyer messages programmed with Shift-F1 to
> Shift-F7?   Do you want to press F1 in RUN mode to have it call CQ, and F1
> in S&P mode sends your call?
>
> On phone, Win-Test does not work the same as CW.  There is only ONE set of
> voice keyer messages, one message per function key.  Win-Test has never
> supported one set of voice messages for RUN mode and another set of voice
> messages for S&P mode.
>
> If you are using two radios, and always use the secondary radio for S&P,
> you can use Advanced SO2R MODE scenarios to change the message that plays
> when you press F1 for the Secondary Radio.  It could be programmed with $F4
> instead of $F1.
>
> But maybe I really don't understand what you are trying to do.  What do
> you mean by "macros"?  Voice keyer messages?
>
> 73,
> Bob, N6TV
>
> On Sat, Nov 9, 2019 at 1:25 PM Jean-Pierre Rausch <on3lx.jpierre at gmail.com>
> wrote:
>
>> Thank you for your answer Noel, I did activate the function but nothing
>> to do I can’t get the macros for s&p see screen.
>> the run and s&p mode changes well on the small strip I am in s&p but the
>> macros remain in run
>>
>>
>> 73 de ON3LX Jean-Pierre
>>
>>
>>
>>
>> Le 9 nov. 2019 à 22:00, Noel F6BGC <f6bgc74 at gmail.com> a écrit :
>>
>> Hi Jean Pierre,
>> you must change this setting:
>>
>> Tools > Data Entry > Enable  Run/S&P switching
>>
>> GL in the contest.
>>
>> 73 - noel f6bgc
>>
>> Le sam. 9 nov. 2019 à 21:25, Jean-Pierre Rausch <on3lx.jpierre at gmail.com>
>> a écrit :
>>
>>> I wanted to give some points for the wae contest but I have problems
>>> with macros I can’t pass a run to s&p I activated the command and I can do
>>> ctrl tab nothing changes I stay in run
>>> 73 de ON3LX Jean-Pierre
>>>
>> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20191110/fcdf537c/attachment.html>