[WT-support] Audio memories playback issue

[Martin LU5DX]

Got it.

I'll test tomorrow AM.

Thank you so much!

73,


Martin LU5DX


El 27/10/2016 a las 10:18 p.m., Bob Wilson, N6TV escribió:
> OK for IC7800 and IC775 there is no sound card in the radio.
>
> I think the problem may be that OTRSP implementation in Station Genius 
> may not be configured to report PTT status back to Win-Test.  If you 
> can enable tracing of the commands sent to the Station Genius the 
> problem can be debugged more easily.
>
> Perhaps using only a separate COM port for PTT via RTS, instead of the 
> OTRSP COM port, will resolve the problem.
>
> Make sure only one method is used for PTT.
>
> 73,
> Bob, N6TV
>
> On Thu, Oct 27, 2016 at 5:49 PM, Martin LU5DX <lu5dx at lucg.com.ar 
> <mailto:lu5dx at lucg.com.ar>> wrote:
>
>     Hi Bob,
>     We are using two IC7800 and two IC 775.
>     I'll take a look at the scripts tomorrow first time AM.
>     Thank you so much for the information.
>     Keeping you posted.
>
>     73,
>
>     Martin LU5DX
>
>
>     El 27/10/2016 a las 08:05 p.m., Bob Wilson, N6TV escribió:
>>     Oh, if you are using the Windows Sound Card as a voice keyer (not
>>     an external DVK box), PTT must be defined.  You can also use
>>     software PTT to play back voice messages. What type of radio are
>>     you using, Icom?  See http://bit.ly/wtscripts .  In the
>>     IcomScripts.zip file you will find IcomTX and IcomRX.  So to do
>>     software PTT with sound card voice keying, using an advanced SO2R
>>     scenario, say, for the F1 key:
>>
>>     #ICOMTX $F1 #ICOMRX
>>
>>     This will close PTT, play MSG1.WAV, and open PTT.  The IcomEsc
>>     script must also be assigned to the Escape key to open the
>>     radio's PTT line via software after interrupting the message.  In
>>     this case no PTT pin should be defined.
>>
>>     73,
>>     Bob, N6TV
>>
>>     On Thu, Oct 27, 2016 at 3:57 PM, Martin LU5DX <lu5dx at lucg.com.ar
>>     <mailto:lu5dx at lucg.com.ar>> wrote:
>>
>>         Hi Bob,
>>
>>         Yes. The COM used for the OTRSP device has RTS (pin 7) set to
>>         PTT.
>>
>>         If I set it to Allways OFF, when I play the Fn Audio messages
>>         it does not activate the PTT, and I also loose PTT for VOX
>>         operation.
>>
>>         I'll get in touch with Ranko 4O3A.
>>
>>         Thanks much!
>>
>>         73,
>>
>>
>>         Martin LU5DX
>>
>>
>>
>>         El 27/10/2016 a las 07:07 p.m., Bob Wilson, N6TV escribió:
>>>
>>>         Do you have a PTT line defined?  Maybe you should not do
>>>         that if PTT is generated automatically when playing voice
>>>         "memories" instead of using a sound card. Closing PTT when a
>>>         voice memory is playing may interrupt or pause the voice memory.
>>>
>>>         73,
>>>         Bob, N6TV
>>>
>>>
>>>         On Oct 27, 2016 12:37 PM, "Martin LU5DX" <lu5dx at lucg.com.ar
>>>         <mailto:lu5dx at lucg.com.ar>> wrote:
>>>
>>>             Hello,
>>>
>>>             I'm testing the audio memories in Win-Test 4.19, I can
>>>             record the audio with no problem in F1 through F7.
>>>
>>>             However after playing an audio message, then I need to
>>>             press ESCAPE before I can play it again.
>>>
>>>             DVK here is Interface Genius by 4O3A.
>>>
>>>             Any help?
>>>
>>>
>>>             Thanks in advance!
>>>
>>>
>>>             Martin LU5DX
>>>
>>>             _______________________________________________
>>>             Support mailing list
>>>             support at win-test.com <mailto:support at win-test.com>
>>>             http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>             <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>>
>>>
>>>
>>>         _______________________________________________
>>>         Support mailing list
>>>         support at win-test.com <mailto:support at win-test.com>
>>>         http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>         <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>         _______________________________________________ Support
>>         mailing list support at win-test.com
>>         <mailto:support at win-test.com>
>>         http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>         <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support> 
>>
>>     _______________________________________________
>>     Support mailing list
>>     support at win-test.com <mailto:support at win-test.com>
>>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>     <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>     _______________________________________________ Support mailing
>     list support at win-test.com <mailto:support at win-test.com>
>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>     <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support> 
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20161027/8a44d8e4/attachment-0001.html>