[WT-support] Audio memories playback issue

Martin LU5DX lu5dx at lucg.com.ar
Fri Oct 28 02:49:45 CEST 2016


Hi Bob,
We are using two IC7800 and two IC 775.
I'll take a look at the scripts tomorrow first time AM.
Thank you so much for the information.
Keeping you posted.

73,

Martin LU5DX

El 27/10/2016 a las 08:05 p.m., Bob Wilson, N6TV escribió:
> Oh, if you are using the Windows Sound Card as a voice keyer (not an 
> external DVK box), PTT must be defined.  You can also use software PTT 
> to play back voice messages.  What type of radio are you using, Icom?  
> See http://bit.ly/wtscripts .  In the IcomScripts.zip file you will 
> find IcomTX and IcomRX. So to do software PTT with sound card voice 
> keying, using an advanced SO2R scenario, say, for the F1 key:
>
> #ICOMTX $F1 #ICOMRX
>
> This will close PTT, play MSG1.WAV, and open PTT.  The IcomEsc script 
> must also be assigned to the Escape key to open the radio's PTT line 
> via software after interrupting the message.  In this case no PTT pin 
> should be defined.
>
> 73,
> Bob, N6TV
>
> On Thu, Oct 27, 2016 at 3:57 PM, Martin LU5DX <lu5dx at lucg.com.ar 
> <mailto:lu5dx at lucg.com.ar>> wrote:
>
>     Hi Bob,
>
>     Yes. The COM used for the OTRSP device has RTS (pin 7) set to PTT.
>
>     If I set it to Allways OFF, when I play the Fn Audio messages it
>     does not activate the PTT, and I also loose PTT for VOX operation.
>
>     I'll get in touch with Ranko 4O3A.
>
>     Thanks much!
>
>     73,
>
>
>     Martin LU5DX
>
>
>
>     El 27/10/2016 a las 07:07 p.m., Bob Wilson, N6TV escribió:
>>
>>     Do you have a PTT line defined? Maybe you should not do that if
>>     PTT is generated automatically when playing voice "memories"
>>     instead of using a sound card. Closing PTT when a voice memory is
>>     playing may interrupt or pause the voice memory.
>>
>>     73,
>>     Bob, N6TV
>>
>>
>>     On Oct 27, 2016 12:37 PM, "Martin LU5DX" <lu5dx at lucg.com.ar
>>     <mailto:lu5dx at lucg.com.ar>> wrote:
>>
>>         Hello,
>>
>>         I'm testing the audio memories in Win-Test 4.19, I can record
>>         the audio with no problem in F1 through F7.
>>
>>         However after playing an audio message, then I need to press
>>         ESCAPE before I can play it again.
>>
>>         DVK here is Interface Genius by 4O3A.
>>
>>         Any help?
>>
>>
>>         Thanks in advance!
>>
>>
>>         Martin LU5DX
>>
>>         _______________________________________________
>>         Support mailing list
>>         support at win-test.com <mailto:support at win-test.com>
>>         http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>         <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>
>>
>>
>>     _______________________________________________
>>     Support mailing list
>>     support at win-test.com <mailto:support at win-test.com>
>>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>     <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>     _______________________________________________ Support mailing
>     list support at win-test.com <mailto:support at win-test.com>
>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>     <http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support> 
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20161027/d136484a/attachment-0001.html>


More information about the Support mailing list