[WT-support] AUTOCW on Secondary Radio?

[SM5AJV]

Thanks Larry!

I've really got used to the AUTOCW feature and will see if it's
also useful when in RUN state on both radios. I will also try to
use two seperate keyboards, one for each radio using the excellent
wtRemote program.


73
Ingo SM5AJV


2016-02-10 0:52 GMT+01:00 Laurent HAAS - F6FVY <f6fvy at free.fr>:

> Hi Bob et al.
>
> Le 09/02/2016 23:05, Bob Wilson, N6TV a écrit :
>
> Maybe there is confusion because normally you would use the secondary
>> radio to check multipliers, but that's not the case here, because we're
>> discussing the behavior when the secondary radio is set to RUN mode, not
>> S&P mode.
>>
>
> I know what we're discussing about ;-)
>
> For consistency alone, if both windows are set to RUN mode (there are
>> independent settings, one for each window), I think both windows should
>> work the same with respect to AUTOCW.
>>
>
> Ok, let's try it this way. I'm afraid it won't be very usable, but you
> will have it. I hope it won't break anything, but this is why the dev /
> nightly versions exist, after all !
>
>
> 73
>
> Larry - F6FVY
>
> --
> Remember Jan. 7 2015 - #JeSuisCharlie
> Remember Nov. 13 2015 - #JeSuisParis
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20160210/7999bcdb/attachment.html>