[WT-support] Wintest Support for FT991

[Bob Wilson, N6TV]

If you are using COM6 for CW keying (are you using a microHAM box?), set
the type for COM6 to "Other interface". NOT Network, otherwise you will see
keying glitches.

73,
Bob, N6TV
On Nov 15, 2015 12:36 PM, "Marcin" <sp5iou at 10g.pl> wrote:

> Hi.
>
>
>
> Finally I made it working for CW.
>
> FT991 has 2 virtual com interfaces in my configuration com5 controls CAT,
> com6 keying CW RTTY etc…
>
> First I configured Omnirig for FT991 CAT com5 19200,8,N,1 RTS Hanshake DTR
> High Poll int ms 500, Timeout ms 4000.
>
>
>
> Then in Wintest Configure Interfaces Radio1 Omnirig
>
> COM6 – Network 9600,8,N,1 DTR – CW, RTS Always Off Active for radio 1
>
>
>
> I do wonder why it didn’t work as other interface – COM6 was not
> accessible. Iwas using other interface item to key radios by separate
> USB/uart dongle.
>
>
>
> Thank You for inspiration.
>
>
>
> Still awaiting for regular FT991 support by WinTest. I hope it will be
> released before SPDX Contest 2016.
>
>
>
> 73’s Marcin SP5IOU
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20151115/156741a1/attachment.html>