[WT-support] Ptt delayed on cw

[Joe Subich, W4TV]

> Are you using the microHAM control protocol for SO2R? If so, please
> remove the microHAM control port from Win-Test setup and try only
> Classic Auto Control via LPT or virtual COM ports.

Nonsense!  Never use Classic Auto Control unless your computer or the
operating system does not support USB.  The most common cause of a
delay in start of transmit with Winkey is a logger that does not
properly handle the buffer in Winkey - typically one needs to reset
the Winkey device.  This problem is independent of the hardware and
needs to be fixed at the application level.

73,

    ... Joe, W4TV


On 2015-02-23 12:54 AM, Bob Wilson, N6TV wrote:
> Many people have reported similar problems, with varying solutions.
>
> Did you check the Router software for its own PTT delay settings (PA PTT)
> as well as WKSETUP?  Is your Router software up to date?
>
> Even if you're not using a spotting network, did you still disable stream
> logging in both the Alt-O and Alt-A windows?
>
> Did you try typing REOPEN [Enter] [Enter] to re-initalize all COM port
> settings?
>
> Do you have anything generating a PTT beside the WinKey?  Any LPT or COM
> port pins labeled PTT?
>
> Are you using the microHAM control protocol for SO2R?  If so, please remove
> the microHAM control port from Win-Test setup and try only Classic Auto
> Control via LPT or virtual COM ports.
>
> 73,
> Bob, N6TV
>
> On Sun, Feb 22, 2015 at 9:38 PM, LB3RE \"RAG\" Stein-Roar Brobakken <
> post at lb3re.com> wrote:
>
>>
>>
>> Hi
>>
>> Anyone solved this?
>>
>> Winkey delayed almost 1 sec before transmit in MK2R+
>>
>> No telnet and no lead on PTT!!!
>>
>> 73 LB3RE Rag
>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>