[WT-support] Setting up a FT-1000-MP in rtty mode

[Ricardo Navarrete]

Thanks bob fer info!!!!

Sent from my Samsung Galaxy III
El 16/09/2014 23:28, "Bob Wilson, N6TV" <n6tv at arrl.net> escribió:

> 2014-09-16 11:48 GMT-07:00 Ricardo Navarrete <ricardoea4zk at gmail.com>:
>
>> I made the setting up of my ft-100-mp to work on AFSK with my digikeyer,
>> but I must to work on PKT mode. This mode is shown on WT , how can I remap
>> the mode on win test to change PKT as RTTY????
>>
>> Is it possible??
>>
>
> Yes if you disconnect the RS-232 line between Win-Test and the radio, so
> it cannot read the mode, and then change band and mode in Win-Test manually
> to match the band and mode of the radio, by pressing Alt-F1 and Ctrl-F1,
> but I don't think that is what you want.
>
> I think most people use FSK for RTTY with the FT-1000MP and DigiKeyer,
> instead of AFSK, so they don't have this issue.  Step by step instructions
> to configure Win-Test, MMTTY, and the DigiKeyer to use FSK instead of AFSK
> are documented here:
>
> http://www.microham.com/Downloads/DK2_Win-Test_Setup.pdf
>
>
> If you insist on using AFSK, one thing you could try is to edit the
> Win-Test BandPlan to map RTTY frequencies to PKT mode rather than RTTY.
>  But you may have to do more than that.
>
> You could try to tell Win-Test to use OmniRig
> <http://www.dxatlas.com/omnirig> to control the radio instead of the
> built-in FT-1000MP support.  Install OmniRig and configure it for your
> radio's CAT port and baud rate.  Start Win-Test and tell it to use Radio
> type "OmniRig" instead of FT-1000MP.  Uncheck the COM port in Win-Test so
> that only OmniRig talks to the radio directly.
>
> Then you will have to edit the *FT-1000 MP.ini* file that ships with
> OmniRig, to tell it to map PKT mode to "DIG" (default is to map RTTY mode
> to DIG).  You would change these lines:
>
> [pmDIG_U]
> Command=00000009.0C
> ReplyLength=0
>
> [pmDIG_L]
> Command=00000008.0C
> ReplyLength=0
>
>
> to:
>
> [pmDIG_U]
> Command=0000000B.0C
> ReplyLength=0
>
> [pmDIG_L]
> Command=0000000A.0C
> ReplyLength=0
>
>
> and it should move the radio to PKT mode when you select mode RTTY in
> Win-Test.  You may also need to change these lines:
>
> Flag7
> =00000000000000.07.8000000000000000|00000000000000.05.8000000000000000|pmDIG_U
> Flag8
> =00000000000000.07.8000000000000000|00000000000000.05.0000000000000000|pmDIG_L
> Flag9
> =00000000000000.07.0000000000000000|00000000000000.06.0000000000000000|pmDIG_L
>
> to
>
> Flag7
> =00000000000000.07.8000000000000000|00000000000000.06.8000000000000000|pmDIG_U
> Flag8
> =00000000000000.07.8000000000000000|00000000000000.06.0000000000000000|pmDIG_L
> Flag9
> =00000000000000.07.0000000000000000|00000000000000.06.0000000000000000|pmDIG_L
>
>
> Experimentation will be required.
>
> 73,
> Bob, N6TV
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140916/ba0e5f0d/attachment-0001.html>