[WT-support] WT 4.15.0 S&P Bandmap Anomally

[Wes Printz, W3SE/ZL3TE]

Hi Bob,
The Band map settings are as you mentioned.
The issue is when in S&P mode, clicking a spot on the band map, will automatically QSY the rig place the call in the entry field - THEN remove it and mark it on the band map with the Tilde, as I have entered it..... The call entry field is again blank.  I have not moved the VFO...  Only clicked on the spot.
I have to manually re-enter the call in the entry field.  I have not seen this behavior before.
73,
Wes, ZL3TE

      From: "Bob Wilson, N6TV" <n6tv at arrl.net>
 To: Win-Test Reflector <support at win-test.com>; "Wes Printz, W3SE/ZL3TE" <w3se at dxer.com> 
 Sent: Saturday, 29 November 2014 10:39 AM
 Subject: Re: [WT-support] WT 4.15.0 S&P Bandmap Anomally
   
Wes,
Increase the Frequency Change Threshold to 300 Hz or so.  Leave spots bandwidth as 0 Hz.  The ~ means "operator entered spot".  Entry with the "~" will happen if you move the VFO x Hz or more in S&P mode with those other options enabled, after clicking on a spot.
73,Bob, N6TV
On Sat, Nov 29, 2014 at 4:14 AM, Wes Printz, W3SE/ZL3TE <w3se at dxer.com> wrote:



Hello,
I am experiencing an interesting operation with V4.15.0 - S&P mode ONLY - Run is OK.
Double clicking on a call in the Radio 1 band map window will QSY the radio and place the call in the callsign field Then it will Clear the callsign from the logging field, and place a Tilde in the Radio 1 band map window in front of the callsign (~FY5KE) , the same as if one would tune off the spotted freq.
This is random, as sometimes it will operate as normal.  This does not happen in Run mode.
I have recently moved from 4.10.Dev to 4.15.  Is this a normal function or some slight anomaly?    
Unticking Wipe QSO from Bandmap properties, will do the same as above but not wipe the QSO.
Is this just  me or are others seeing the same?


73,
Wes, ZL3TE




_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support





  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20141129/c36fd2d6/attachment.html>