[WT-support] ICOM IC7700

[LB3RE LJ3RE Stein-Roar Brobakken]

Thanks !!    

---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein Roar Brobakken e-mail:post at lb3re.comhttp://la5o.wordpress.comwww.contesting.no

On 12. juli 2014 05:28:00 CEST, Bob Wilson, N6TV <n6tv at arrl.net> wrote:9600 is not the default. For IC-7700, in radio menu: "Others"CI-V Baud Rate 19200 (do not use "Auto") CI-V Address 74h CI-V Transceive ON  RS-232C function CI-V  In Win-Test SETUP menu:  Radio type IC-7700 "Use CI-V Transceive" should be checked. "Don't poll" should also be checked  Next to Radio 1 COM port, click Configure button Click "IC-7700 Default Settings Button" (19200, N, 8, 1, DTR Always Off, RTS Always OFF)  If still no luck, it's probably caused by bad USB-to-Serial adapter (Prolific?), instead of good USB-to-Serial adapter (FTDI).     Start, Run, devmgmt.msc (Windows Device Manager), expand Ports, verify COM port numbers match what you are using in Win-Test. . Right click on COM port, select, Properties, Driver. If it says "Prolific", it may not work.   73,Bob, N6TV/1  (At WRTC)  On Fri, Jul 11, 2014 at 7:33 PM, <post at lb3re.com> wrote: Hi  anyone have tips of how to get IC7700 CAT running ok in WT 4.13.0 and WT 4.13 HQ?  LA7AK and LA9BM cant get rig working ok with default 9600 settings.  73s LI2HQ  LB3RE          
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140712/97a2262b/attachment.html>