[WT-support] ICOM IC7700

[Bob Wilson, N6TV]

9600 is not the default.

For IC-7700, in radio menu: "Others"

   - CI-V Baud Rate 19200 (do not use "Auto")
   - CI-V Address 74h
   - CI-V Transceive ON
   - RS-232C function CI-V

In Win-Test SETUP menu:

   - Radio type IC-7700
   - "Use CI-V Transceive" should be checked.
   - "Don't poll" should also be checked
   - Next to Radio 1 COM port, click Configure button
   - Click "IC-7700 Default Settings Button" (19200, N, 8, 1, DTR Always
   Off, RTS Always OFF)

If still no luck, it's probably caused by bad USB-to-Serial adapter
(Prolific?), instead of good USB-to-Serial adapter (FTDI).

Start, Run, devmgmt.msc (Windows Device Manager), expand *Ports*, verify
COM port numbers match what you are using in Win-Test.
.
Right click on COM port, select, Properties, Driver. If it says "Prolific",
it may not work.

73,
Bob, N6TV/1
(At WRTC)

On Fri, Jul 11, 2014 at 7:33 PM, <post at lb3re.com> wrote:

> Hi
>
> anyone have tips of how to get IC7700 CAT running ok in WT 4.13.0 and WT
> 4.13 HQ?
>
> LA7AK and LA9BM cant get rig working ok with default 9600 settings.
>
> 73s LI2HQ
>
> LB3RE
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140711/632e6690/attachment.html>