[WT-support] Changing Band / TS480SAT - WT v 4.13 (CT4NH)

[Luis Teixeira]

Thanks Bob!

Done and all working fine, no need to set as OmniRig.

Best 73 de Luis, CT4NH


Message: 6
Date: Sun, 6 Jul 2014 14:12:20 -0700
From: "Bob Wilson, N6TV" <n6tv at arrl.net>
To: Win-Test Reflector <support at win-test.com>
Subject: Re: [WT-support] Changing Band / TS480SAT - WT v 4.13 (CT4NH)
Message-ID:
        <CAOmNKGJwVnFkB9Cuw6yYUTnbOhzqhjKgRfQJd_MYEDw=r10b3A at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

On Sun, Jul 6, 2014 at 1:38 PM, Luis Teixeira <xx9tnh at gmail.com> wrote:

> I've noticed that when I click on one DX spot (RTTY/FSK) the radio
> (TS480SAT) does not go to RTTY but instead goes to CW . This not happens
> when clicking in one SSB spot - radio goes SSB - or CW - radio goes to CW.
> Bandplan problem?
>

Yes, probably.

   1. Right click on band map
   2. Select *Properties*
   3. At the bottom, click [Setup]
   4. Check that the RTTY frequencies match what you are clicking on.  If
   not, edit them.
   5. Of course, you have to use a log with "All modes" selected, not
   "Mixed".  Type REOPEN [Enter] to check that.
   6. Also type RTTY [Enter] in the logging window to see if your TS480SAT
   switches into RTTY mode.  If not, more work is required (perhaps setting
   Radio Type to OmniRig instead of Kenwood).

73,
Bob, N6TV
-- 

*Luis Sutil Teixeira*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140707/6498ed13/attachment.html>