[WT-support] Changing Band / TS480SAT - WT v 4.13 (CT4NH)

[Bob Wilson, N6TV]

On Sun, Jul 6, 2014 at 1:38 PM, Luis Teixeira <xx9tnh at gmail.com> wrote:

> I've noticed that when I click on one DX spot (RTTY/FSK) the radio
> (TS480SAT) does not go to RTTY but instead goes to CW . This not happens
> when clicking in one SSB spot - radio goes SSB - or CW - radio goes to CW.
> Bandplan problem?
>

Yes, probably.

   1. Right click on band map
   2. Select *Properties*
   3. At the bottom, click [Setup]
   4. Check that the RTTY frequencies match what you are clicking on.  If
   not, edit them.
   5. Of course, you have to use a log with "All modes" selected, not
   "Mixed".  Type REOPEN [Enter] to check that.
   6. Also type RTTY [Enter] in the logging window to see if your TS480SAT
   switches into RTTY mode.  If not, more work is required (perhaps setting
   Radio Type to OmniRig instead of Kenwood).

73,
Bob, N6TV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140706/204a8301/attachment-0001.html>