[WT-support] Fwd: FTDX3000

Eric M. Guzman np3a at np3a.com
Sat Jan 18 00:20:59 CET 2014


FT2000 worked for me. Although not sure if completely compatible. FT9K didnt.

73 Eric NP3A
---
Sent via my mobile device. Please excuse the brevity.



On January 17, 2014 6:47:24 PM "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:

> For FT DX 3000, try selecting radio type FTDX-9000 in Win-Test, and set up
> the Radio's COM port Configuration to 4800,N,8,2,DTR OFF, RTS Handshake:
>
> In the FT DX3000 menu:
>
> 037 CAT SELECT = RS232C if you are using 9-pin serial port, otherwise USB
> (default)
>    (If you are using USB, you have to load and install the USB driver from
> here<http://www.yaesu.com/downloadFile.cfm?FileID=8098&FileCatID=42&FileName=CP210x%5FVCP%5FWindows.zip&FileContentType=application%2Fx%2Dzip%2Dcompressed>
> before
> starting Win-Test)
> 038 CAT RATE = 4800 bps (default)
> 040 CAT RTS = ENABLE (default)
>
>
> If that does not work, set CAT RTS = DISABLE and set RTS (pin 7) to Always
> OFF.
>
> Please let us know what works so that we can update the documentation.
>
> 73,
> Bob, N6TV
>
> On Fri, Jan 17, 2014 at 1:22 PM, Krajcár Lajos HA2QW <ha2qw at qrz.hu> wrote:
>
> > Hi All!
> >
> > Met somebody FTDX3000 cat settings in Win-Test? How have to do it?
> > I try FT2000 and FT950 setup, but it not work.
> >
> > vy73/DX
> > Lajos




More information about the Support mailing list