[WT-support] TI5/CT1ILT Help with K3+Win-test

[Filipe Lopes]

Hi again

thanks for the answers. Nothing helped so far.

changed cables and still the same.

I guess will have to play like this.

If anyone has any last minute suggestion I'll take it!

thanks
Filipe TI5/CT1ILT

73's Filipe Lopes
CT1ILT, F4VPX, CR6K



2014-02-14 12:29 GMT+01:00 Pete Smith N4ZR <n4zr at contesting.com>:

>  Because Winkeyer operates entirely differently from serial port CW, I
> think you can rule out Win-Test as a source of this problem,. The
> Winkeyer receives ASCII from the serial port and forms the CW internally.
>
> It is most likely a K3 setting issue, and a much better place for answers
> is the Elecraft reflector <elecraft at mailman.qth.net><elecraft at mailman.qth.net>.
> BTW I would start by turning off K3 QRQ - that's intended for real QRQ, up
> in the 60-80 WPM range
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at http://reversebeacon.net,
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
>
> On 2/14/2014 3:33 AM, Filipe Lopes wrote:
>
>  Hi guys,
>
>  I am in Costa Rica and I am using a K3 with win-test and my notebook
> with WIN7 and when I increase speed over 34 36 WPM  the CW starts to get
> messy, some of the caracheters I send are almost unreadable, like C is
> almost Y.
>
>  I changed Keyer, was using K1EL Winkey, then I tried CW via CAT cable,
> and then I have my own cable with a transistor and resistor and they all do
> the same.
>
>  I tried unpluging the CAT system while txing with my cable keyer and
> still the same.
>
>  I am using all USB TO RS232 converters that work well with my TS590.
>
>  I have changed into CW QRQ in K3 menu.
>
>  is there anything else I should look at?
>
>  thanks a million for help
>
>  73's Filipe Lopes
>  TI5W in ARRL CW
>
>
>  CT1ILT, F4VPX, CR6K
> ​ ​
>
>
>
>
> _______________________________________________
> Support mailing listsupport at win-test.comhttp://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140214/c177ddc5/attachment-0001.html>