[WT-support] Mults not showing in IOTA cabrillo log

[Bob Wilson, N6TV]

Gordon,

   1. In the logging window, type REOPEN [Enter]
   2. Change the *Category* to *Multi-Operator* *Single Transmitter* (the
   only category with Run/Mult status)
   3. Type WRITELOG [Enter] and follow the prompts to create a new Cabrillo
   file
   4. 0 and 1 will be written to the TX ID column for RUN and MULT station
   QSOs, respectively

Even though you have two transceivers on the air at the same time, it is
still classified as a "single transmitter" category whenever the other
transceiver can only work multipliers (as in CQ WW M/S).

73,
Bob, N6TV

On Mon, Aug 4, 2014 at 2:18 PM, mm0gpz <mm0gpz at blueyonder.co.uk> wrote:

> Hi.
>
> When I create a cabrillo log for the IOTA contest just past, the log is
> created but every entry has 0 at the end of the line as if every qso was on
> the run station.
>
> QSO: 14268 PH 2014-07-26 1212 GM3X          59  0032 EU-009 IZ3GNG
>  59  0007 ------ 0
> QSO: 14268 PH 2014-07-26 1212 GM3X          59  0033 EU-009 PA2LS
> 59  0004 ------ 0
> QSO:  7111 PH 2014-07-26 1212 GM3X          59  0034 EU-009 GM2T
>  59  0016 EU-008 0
> QSO: 14268 PH 2014-07-26 1212 GM3X          59  0035 EU-009 ER3CT
> 59  0009 ------ 0
> QSO: 14268 PH 2014-07-26 1213 GM3X          59  0036 EU-009 GM5O
>  59  0030 EU-009 0
>
> The 40m QSO was on the mult station and should read 1 after EU008.
>
> Looking at the log in wintest, under station, most qso's are R1 and the
> remainder are marked M. It is following the mults rules correctly. Now I
> could go through the cabrillo and manually change a few hundred QSO's but
> most likely I'll miss one or two and I don't want to do that.
>
> The log was created with V4.10. I updated to 4.13 to see if it would fix
> the issue and it didn't.
>
> Contest template is as follows:
> Category        Multi-op multi-transmitter
> Overlay           DXPedition
> Class             High Power
> Mode              Mixed
>
> Anyone else having this issue or is it just me?
>
>
> 73
>
>
> Gordon
> MM0GPZ
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140804/8a09ad85/attachment.html>