[WT-support] Mults not showing in IOTA cabrillo log

mm0gpz mm0gpz at blueyonder.co.uk
Mon Aug 4 23:18:31 CEST 2014


Hi.

When I create a cabrillo log for the IOTA contest just past, the log is
created but every entry has 0 at the end of the line as if every qso was on
the run station.

QSO: 14268 PH 2014-07-26 1212 GM3X          59  0032 EU-009 IZ3GNG
 59  0007 ------ 0
QSO: 14268 PH 2014-07-26 1212 GM3X          59  0033 EU-009 PA2LS
59  0004 ------ 0
QSO:  7111 PH 2014-07-26 1212 GM3X          59  0034 EU-009 GM2T
 59  0016 EU-008 0
QSO: 14268 PH 2014-07-26 1212 GM3X          59  0035 EU-009 ER3CT
59  0009 ------ 0
QSO: 14268 PH 2014-07-26 1213 GM3X          59  0036 EU-009 GM5O
 59  0030 EU-009 0

The 40m QSO was on the mult station and should read 1 after EU008.

Looking at the log in wintest, under station, most qso's are R1 and the
remainder are marked M. It is following the mults rules correctly. Now I
could go through the cabrillo and manually change a few hundred QSO's but
most likely I'll miss one or two and I don't want to do that.

The log was created with V4.10. I updated to 4.13 to see if it would fix
the issue and it didn't.

Contest template is as follows:
Category        Multi-op multi-transmitter
Overlay           DXPedition
Class             High Power
Mode              Mixed

Anyone else having this issue or is it just me?


73


Gordon
MM0GPZ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20140804/af9c3159/attachment.html>


More information about the Support mailing list