[WT-support] Icom IC-910 Settings

[Bob Wilson, N6TV]

I don't understand how it could have ever worked if you are not polling and
not using CI-V Transceive.  I believe you must use one or the other, and
the CI-V setting in the IC-910 menu must be compatible with what you select
in Win-Test, including:

CI-V Address (must be 60h)
CI-V Baud rate (should be 19200 or 9600)
CI-V Transceive (should be ON)

In Win-Test, select *both* Use CI-V Transceive and select "Don't poll" and
set the baud rate to 19200.  If that doesn't work, try 9600 (after
selecting 9600 in the Radio's menu).

Finally, does your RS-232 port on your PC use a USB-to-Serial adapter?  If
so, what does it show in the device manager as the Driver type?  (Start,
Run, devmgmt.msc, expand Ports, right click on COM4, select Properties,
look at Driver tab).

73,
Bob, N6TV

On Sat, Nov 30, 2013 at 9:21 AM, Stewart GM4AFF <stewart at gm4aff.net> wrote:

> Does anyone have any working suggestions for an IC-910 with Win-Test?
>
> I’m using a level-converter at the radio CI-V socket to an RS-232 port on
> the PC.
>
> It worked back in October, but I unplugged it, and set WinTest back to an
> HF radio setup.
>
> Now when I try to configure it for VHF with the same settings it fails to
> work.
>
> I’ve tried every conceivable combination, but this is what it was set to
> when it did work:
>
> Using COM4 (which is correct) with 19200 8-N-1 DTR and RTS both off. Radio
> CI-baud – 19200. Radio 1 set to IC-910 – Don’t Poll. CI-V Transceive NOT
> selected (‘cos that’s what worked before). No other interfaces are
> connected or selected in WinTest.
>
>
>
> Anyone else tried an IC-910 with WinTest – and got it to work. The
> settings mentioned in previous reflector emails do not work.
>
>
>
> Thanks,
>
> Stewart
>
> GM4AFF
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20131130/528d14ce/attachment.html>