[WT-support] SO2R scenario $TR does not work

[Daniel "Danny" Horvat, E73M]

Marek, Fabio is right, I actually never had a problem with EZmaster 
itself.
I was one of first ones to get it and apart update of firmware never 
had to touch it. It is great because it does more then SO2R switching. I 
have additional relay board in it to control many antenna combinations 
besides driving the sixpack switch. Band decoders are also great 
addition as well as audio memory keyer, too bad it is not produced 
anymore.

Danny, E73M


---
Daniel Danny Horvat, E73M
Antennas by E73M
http://www.MyAntennas.com

On 2013-11-08 03:03, I4UFH wrote:
> Hi Marek,
> 
> EzMaster simply relay the Contest Software command to the internal
> devices, in this case could be
> WinKey, no process of data is done, so if there is some buggy is in
> the management of the data from
> the Contest Software. Unfortunately WinKey, has never been realible
> with WT, due tha 1 chr managing
> and as Danny mention, in this case is not a matter of SO2R Box is a
> matter of logic in the scenario
> managing, the problem is still there without any box connected or 
> configured.
> 
> 73 de Fabio I4UFH
> 
> 
> 
> Il giorno 08/nov/2013, alle ore 07:53, Marek SQ2GXO <gxo at wp.pl> ha 
> scritto:
> 
>> Danny.
>> 
>> I had the same problem with EZMAster. Wasn't able to solve it.
>> It looks like a problem with EZMaster built in CW keyer.
>> EZMaster is buggy - I used it in one or two contest and then build 
>> SO2RDuino which is far more reliable.
>> 
>> 73,
>> Marek SQ2GXO / SO2O
>> 
>> Dnia Piątek, 8 Listopada 2013 00:19 Daniel "Danny" Horvat E73M 
>> <e73m at e73m.com> napisał(a)
>>> Bob,let me explain it again.
>>> 
>>>  I am using EZmaster and WT 4.8 with scenarios for years and that is
>>> not a problem.
>>> 
>>>  Try this, choose scenario "check band", then press * to switch 
>>> focus
>>> to secondary radio, then press F2 to send 599+zone.
>>> It does send it but according variables in secondary radio column:
>>> $RESET $F2 $R1R1 $TR2 $MSG1, it should after 599+zone send the MSG1 
>>> (I
>>> set it to TEST E73M)on primary radio. Problem is that that $TR2 and
>>> $MSG1 does not execute at all.
>>>  You do not need any SO2R box connected to see what is going on in
>>> "secondary radio" window.
>>> I tried it in 4.8 and does not work in 4.11 version either. 
>>> Obviously
>>> not many people tried to use $TR in scenarios since I am the first 
>>> to
>>> ask about it.
>>> 
>>> This scenario, check band", is made by developer but it does not 
>>> work
>>> as expected or I am missing something.
>>> 
>>> Thanks, Danny E73M
>>> ---
>>> Daniel Danny Horvat, E73M
>>> Antennas by E73M
>>> http://www.MyAntennas.com
>>> 
>>> On 2013-11-07 15:47, Bob Wilson, N6TV wrote:
>>>> On Thu, Nov 7, 2013 at 2:38 AM, Daniel "Danny" Horvat, E73M
>>>> <e73m at e73m.com> wrote:
>>>> 
>>>>> but should scenarios work without so2r box like mine (EZmaster)
>>>>> connected?
>>>> 
>>>> The scenarios should work with EZMaster, microHAM (Classic Auto
>>>> Control or microHAM control Protocol), YCCC or other OTRSp box _if_
>>>> you have it configured properly.  How are you telling the EZMaster 
>>>> to
>>>> switch TX Focus?  LPT port pin 14?  Does your computer have an LPT
>>>> port connected to EZMaster?  Or are you saying you do _not_ have an
>>>> EZMaster, and you are keying CW via COM port pin?  In that case, 
>>>> you
>>>> have to specify one COM port "Active with: Radio 1", and a second
>>>> "Active with: Radio 2" (press the Configure button next to the COM
>>>> port, change "Both" to "Radio 1" or "Radio 2", click OK).
>>>> 
>>>> If you press [*], does TX Focus Switch OK or not?
>>>> 
>>>> 73,
>>>> Bob, N6TV
>>>> _______________________________________________
>>>> Support mailing list
>>>> support at win-test.com
>>>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>> _______________________________________________
>>> Support mailing list
>>> support at win-test.com
>>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>> 
>> 
>> 
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
> 
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support