[WT-support] SO2R scenario $TR does not work

[Bob Wilson, N6TV]

$TR1 and $TR2 work OK if you have a TX Focus pin defined properly, either
on COM port or LPT pin.  Are you using a microHAM SO2R box or PIEXX with DX
Douler or something else for TX focus switching?   Is SO2R box set for
"Automatic" mode (not "Manual")?

For microHAM, if the microHAM control protocol doesn't work, try "Classic
Auto Control" via virtual COM or LPT port pins.

If you still can't figure it out, send me your WT.INI, SO2R_Advanced.ini,
and .WT4 files.

73,
Bob, N6TV

On Thu, Nov 7, 2013 at 12:17 AM, Daniel "Danny" Horvat, E73M
<e73m at e73m.com>wrote:

> Does anyone use SO2R scenario with $TR1 or $TR2 variables on 4.8 or 4.11
> versions?
>
>  I played with K0DQ published scenarios http://ncjweb.com/NCJ-JulAug-
> Redd-BonusContentFinal.pdf but it does not work. Maybe I am missing
> something.
>
> Thanks
>
> 73 Danny Horvat, E73M/N4EXA
> --
> Daniel Danny Horvat, E73M
> Antennas by E73M
> http://www.MyAntennas.com
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20131107/ededeba6/attachment.html>