[WT-support] SO2R Question

[Matthias Jelen]

Hi Luca,

I can see the MK2R detected as you say. I can even see the 
right commands going to the MK2R+ when I monitor the control 
port.

In the meantime DJ4MZ and me played around a bit more. 
Strange thing: The RX focus LED on the MK2R acts as desired 
for abt. 0.5 to 1.5 seconds, afterwards it is switched back 
to the setting done in the functions tab of the router. So 
it seems as the scenario switching from Win-Test does have 
some effect, but is overruled by the router.

SO2R advanced is selected - I just use * to switch bands, 
which is handy at our station because Stn1 and Stn2 are 
absolutely equal.

We quitted our investigations and headed to our favourite 
pizza place - I´ll be back to the station for EUHFC, maybe 
it´s worth trying with the latest router version....

In the meantime, any comments are welcome.

73,

Matthias, DK4YJ


> Hi Mat,
>
> when you start WT you should read "MK2R detected" on the 
> main window if you are using microham protocol.
> It means that all functions for radio controls are just 
> passing through MK2R to the radios but commands are 
> generated by WT scenario or short-cut keys if the operator 
> use them.
> At this point all settings in the MK2R tab are just not 
> effecting the functions.
> I cannot understand what you feel wrong while using them.
> Anyway you should open also secondary radio window and 
> from there you can select the appropriate scenario. If you 
> are using "*" to switch radios it probably means you are 
> not in SO2R advanced operation.
>
> Luca
>
> 2013/7/27 Matthias Jelen <Matthias.Jelen at gmx.de 
> <mailto:Matthias.Jelen at gmx.de>>
>
>     Hello contesters,
>     I have a question to the SO2R experts:
>     I am struggling to get the scenario switching from
>     within Win-Test to work properly. I think it worked
>     once, but at the moment I feel that the settings from
>     the Microham Routers Function Tab override the
>     settings from Win-Test.
>     Changing radios with *, switching between "Primary
>     Radio", "Secondary Radio" and "Both" work as desired.
>     I can see the appropriate commands going to the MK2R
>     when I monitor the control port with the router.
>     Setup was done according to the pages in the Win-Test
>     wiki. I can find a remark there that the settings in
>     the functions tab are overridden from Win-Test, but
>     this doesn´t seem to be the case.
>     Can anybody please give me a hint how I can switch
>     between the settings done in the Microham Routers
>     functions tab and the scenarios in Win-Test?
>     Thanks a lot & 73,
>     Matthias, DK4YJ (@DQ4W)
>
>     _______________________________________________
>     Support mailing list
>     support at win-test.com <mailto:support at win-test.com>
>     http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
> -- 
> Luca IK2NCJ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130728/11a5f2d9/attachment.html>