[WT-support] R: Re: Wintest + IC-781

[Sante - IK0HBN]

Thank you Rudy.
I read your msg just now. By the way we gave up of IC781 and we used 
IC-7600 without any sort of problem. I saved your solution for 
further investigations.
Thank you
Sante


At 11.33 13/07/2013, Rudolf Schwenger wrote:
>Hi Sante,
>
>I am using the IC-781 as well as the IC-7800 both in conjunction 
>with the microham MK2. OS is XP.
>
>Here are my settings for the 781:
>
>(A) MK2 (v.4.6 (winKey rev. 10))
>:
>(Aa) Ports Menue:
>CAT: COM 5 (virtual port) 1200 8-N-1
>CW: COM 7  (virtual port) DTR
>PTT: COM 7  RTS
>Foot Switch: COM 7  DCD
>WinKey: COM 8 (virtual port) 9600 8-N-1
>
>(Ab) System settings Menue
>CI-V port settings:
>Function: TX frequency
>Baud rate: 1200 bps
>Address: 26
>
>if you press "Set" in the CAT-line, the window opening should display:
>ICOM-IC781 (if not, choose "IC-781" from the list)
>CI-V address: 26
>port: None
>the box "disable router queries" should be unchecked
>both boxes "Ist" and "2nd" in the line "forward autoinformation to 
>CAT port should be checked
>
>(B) WinTest (v. 4.9.1)
>
>In the Options Menue press "configure interfaces"
>
>Settings:
>COM 5 (virtual port) "Radio 1"  1200 8-N-1
>COM 7 (virtual port) "other interface"  9600 8-N-1 CW PTT
>COM 8 (virtual port) "WinKey"  9600 8-N-1 CW PTT
>
>Transceiver: Radio 1  IC-781
>Transceive used  CI-V
>do not poll: blinded
>polling rate: Auto
>Ethernet activation: checked
>Broadcast address: 192.168.0.255
>Port Number:  9871
>
>The reason why I am using 1200 Baud has to do with the fact that the 
>transceiver CAT also controls my automativ antenne match box, which 
>wants to see 1200 baud....
>
>Of course you must make sure that the COM ports used should not be 
>used by any other programmes.
>
>I hope I could help you!
>
>See you this afternoon in the IARU-contest....
>
>vy 73 de Rudy, DJ3WE
>
>
>
>
>----- Original Message ----- From: <ik0hbn at libero.it>
>To: <pa2a at xs4all.nl>; <support at win-test.com>
>Sent: Saturday, July 13, 2013 10:34 AM
>Subject: [WT-support] R: Re: Wintest + IC-781
>
>
>>Thank you Steef,
>>we have no other software running or installed in PC. It's a fresh WINXP
>>installation...
>>Sante
>>
>>>----Messaggio originale----
>>>Da: pa2a at xs4all.nl
>>>Data: 13/07/2013 10.12
>>>A: <support at win-test.com>, "ik0hbn at libero.it"<ik0hbn at libero.it>
>>>Ogg: Re: [WT-support] Wintest + IC-781
>>>
>>>Hi,
>>>
>>>Make sure that no other software uses the same COM port, like Omnirig. Even
>>when  is not
>>>running, installed software can lock the COM port.
>>>
>>>73s Steef PA2A
>>>
>>>>Hi all,
>>>>May someone help us in letting WT sees Icom 781 cat? Is there any secret
>>>>feature to set into radio or software? We checked on radio 9600 baud and
>>>>Tranceiver in OFF. On Wintest we have DEFAULT profile at 9600. n, 8, 1 DTR
>>and
>>>>DTS both in OFF. COM are NOT virtual com and SO is WIn XP
>>>>Any hint? TIA
>>>>Sante
>>>
>>
>>
>>_______________________________________________
>>Support mailing list
>>support at win-test.com
>>http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support