[WT-support] CW sending problem

[Hamad 9K2HN]

I have tried all solutions but non of them worked the problem still
remains, What is happening is that win-test is somehow is
losing communication with winkey, because the router&win-test still reads
the Freq OK but when I open configure interface page and without changing
any thing the clicking OK the program shutdown. any other idea solution?

I have tried also disconnecting the paddle but the problem still exist.

de 9k2hn
Hamad


On Sat, Feb 2, 2013 at 4:38 PM, Joe Subich, W4TV <lists at subich.com> wrote:

> Hamad,
>
> Make lead/tail changes (and WinKey settings except speed) in microHAM
> Router.  Router "masters" those values to prevent random changes when
> the application unexpectedly closes and reopens WinKey.
>
> 73,
>
>    ... Joe, W4TV
>
>
>
> On 2/2/2013 2:08 AM, Hamad 9K2HN wrote:
>
>> Thank you for the reply Bob, the problem starts before i tab the paddle. i
>> will try to change the lead and tail time to 0ms. and for rig I'm using an
>> ft-2000D.
>>
>> Hamad
>> 9K2HN
>> On Feb 1, 2013 10:56 PM, "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
>>
>>  If you tap the paddle while the WinKey is sending, or *just after* it has
>>>
>>> finished sending, this puts the WinKey in "halt mode" (all messages
>>> discarded, no more computer messages accepted), until you touch the
>>> paddle
>>> again.  It may help to set PTT lead and TAIL to 0 ms in the WKSETUP
>>> dialog
>>> (type WKSETUP [Enter] in Win-Test logging window).
>>>
>>> One reason I prefer to use WinTest COM port or LPT port keying, with a
>>> separate paddle connected to the internal keyer of the radio, is to avoid
>>> these WinKey quirks.  With some radios you can control the internal keyer
>>> speed via a LUA script so that it can stay in sync with the Win-Test
>>> keyer
>>> speed (or sends 2 WPM slower, you preference).  See
>>> http://bit.ly/wtscripts (K3scripts.zip).  I'm also trying to get this to
>>> work with newer Icom radios.
>>>
>>> What type of rig are you using?
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Fri, Feb 1, 2013 at 3:21 AM, Hamad 9K2HN <9k2hn at 9k2hn.com> wrote:
>>>
>>>  Hi,
>>>>
>>>>      I have just installed a new PC in my contest station (win7 64 Bit)
>>>> and all went fine except that for unknown reason some time it is stop
>>>> sending CW and I have to press Esc or send a dit from the Paddle then it
>>>> will go back to normal. Still i'm not able to find exactly what causing
>>>> the
>>>> problem. Any one had the same problem?
>>>>
>>>> I'm using Microham Microkeyer II with the latest firmware and router.
>>>>
>>>> de 9k2hn
>>>> Hamad
>>>>
>>>> ______________________________**_________________
>>>> Support mailing list
>>>> support at win-test.com
>>>> http://lists.f5mzn.org/cgi-**bin/mailman/listinfo/support<http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>>>
>>>>
>>>>
>>> ______________________________**_________________
>>> Support mailing list
>>> support at win-test.com
>>> http://lists.f5mzn.org/cgi-**bin/mailman/listinfo/support<http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>>
>>>
>>>
>>
>>
>> ______________________________**_________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-**bin/mailman/listinfo/support<http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>>
>>  ______________________________**_________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-**bin/mailman/listinfo/support<http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130203/86e007ce/attachment.html>