[WT-support] CW sending problem - additional

DALE LONG dale.long at prodigy.net
Fri Feb 1 21:52:41 CET 2013


This may be a different issue.  I have found that each time I send CQ contest, the speed gets slower and slower and slower until I hit the Escape key.  This happens when not in repeat mode (but perhaps the program thinks it is in repeat mode, else why does the Escape button return to normal speed).  Of course, I could have mistakenly set some parameter wrong.

Dale - N3BNA

P.S. I do not use a WinKeyer, using W1GEE keying cable from LPT port of desktop to back of IC-7600.


________________________________
 From: "Bob Wilson, N6TV" <n6tv at arrl.net>
To: support at win-test.com 
Sent: Friday, February 1, 2013 2:56 PM
Subject: Re: [WT-support] CW sending problem
 

If you tap the paddle while the WinKey is sending, or just after it has finished sending, this puts the WinKey in "halt mode" (all messages discarded, no more computer messages accepted), until you touch the paddle again.  It may help to set PTT lead and TAIL to 0 ms in the WKSETUP dialog (type WKSETUP [Enter] in Win-Test logging window).

One reason I prefer to use WinTest COM port or LPT port keying, with a separate paddle connected to the internal keyer of the radio, is to avoid these WinKey quirks.  With some radios you can control the internal keyer speed via a LUA script so that it can stay in sync with the Win-Test keyer speed (or sends 2 WPM slower, you preference).  See http://bit.ly/wtscripts (K3scripts.zip).  I'm also trying to get this to work with newer Icom radios.

What type of rig are you using?


73,
Bob, N6TV

On Fri, Feb 1, 2013 at 3:21 AM, Hamad 9K2HN <9k2hn at 9k2hn.com> wrote:

Hi,
>
>
>    I have just installed a new PC in my contest station (win7 64 Bit) and all went fine except that for unknown reason some time it is stop sending CW and I have to press Esc or send a dit from the Paddle then it will go back to normal. Still i'm not able to find exactly what causing the problem. Any one had the same problem?
>
>
>I'm using Microham Microkeyer II with the latest firmware and router.
>
>
>de 9k2hnHamad
>_______________________________________________
>Support mailing list
>support at win-test.com
>http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>

_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20130201/abc6eddb/attachment.html>


More information about the Support mailing list