[WT-support] Audio routing problem with YCCC SO2R+

[Dennis Egan]

Bob

2nd option- In some of the Wintest documentation, they actually showed
how to use macros
to emulate a LATCH situation- I ifted this from that.
Setting up scenarios

A standard F1 message contains only the content of what is sent, i.e.
F1 = TEST CT3NT. When using Advanced SO2R mode the F1 message will
have the content plus the scenario to control audio and transmitting.
Imagine the following scenario:
F1 = $R2R2 $F1 $R1R2
This simple scenario will do the following. When the operator pushes
the F1 key, Win-Test will switch the headphones to radio2 only
($R2R2), transmit the content of standard F1 message (TEST CT3NT) and
when that is over will switch the headphones to left ear on radio1 and
right ear on radio2 ($R1R2).
$R2R2 $F1 set up the audio headphone settings and transmission in
moment 1 of the QSO
$R1R2 sets the audio headphone settings for moment 2 of the QSO

I realize it may not be exactly what you are looking for, but it might
work for you.

GL

UE

On Fri, Oct 26, 2012 at 9:41 AM, Bob Henderson <bob at 5b4agn.net> wrote:
> Dennis
>
> Many thanks but checking the LATCH box in the SO2R program makes no
> difference to audio routing.  LATCH box in the WT Secondary Radio window is
> permanently greyed out.  I don't know whether that's significant.
>
>
> 73 Bob, 5B4AGN
>
>
> Bob
>
> In the SO2R Box program, there is a box called "LATCH".  Check that
> and you should get the
> functionality you seek.
>
> Dennis W1UE
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>