[WT-support] VFO-B on FT-2000

[Bob Wilson, N6TV]

Maybe I didn't answer your question.  If you want Win-Test to ignore VFO B,
just do not enable DUAL watch or SPLIT mode.  Double click on a spot in the
band map or Announcements window, work it, then press Alt-F4 to return to
the run frequency.

73,
Bob, N6TV

On Wed, Oct 17, 2012 at 2:58 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Try this:
>
> Put VFO A on 20, VFO B on 15.  At the top of the band map window, double
> click on VFO B.
>
> Does the logging window switch from 20 to 15m?  Is that what you want?
>
> Remember that you can use Alt-Double click on a spot to move VFO B to that
> freqeuncy, without affecting VFO A.  When you want to work the spot, swap
> VFOs.  If you just got into SPLIT (TX on VFO B), I'm not sure if Win-Test
> will log the QSO on the right band.
>
> 73,
> Bob, N6TV
>
> On Wed, Oct 17, 2012 at 2:38 PM, usarobert <usarobert at web.de> wrote:
>
>> ** Thank you very mich for the fast answer. However ... a part oft my
>> Problem stays unsolved. Is there maybe a way Tod completely ignore vfo-b ?
>> So i would habe to use the A<->B button Tod Marke the qso.
>> This way I could listen to a difficult Station and easily come back when
>> i notice an open slot.
>> Bzw the Problem is also there if Booth vfos are in the same Band. The
>> logged frequency is always B.
>>
>> Thanks again
>> Robert
>> DC2KN
>> --
>> Diese Nachricht wurde von meinem Android Mobiltelefon mit WEB.DE Mail
>> gesendet.
>>
>>
>>
>> "Bob Wilson, N6TV" <n6tv at arrl.net> schrieb:
>>
>>> Win-Test does not support SO2V (Single-Op, Two VFO), only SO2R
>>> (Single-Op, Two Radio).
>>>
>>> Win-Test logs QSOs made on VFO A.
>>>
>>> Use the SwapVFO.wts script for the FT-2000 to quickly Swap A/B before
>>> logging the QSO.  You can download and install this script from
>>> http://bit.ly/wtscripts (FT2000scripts.zip).  The Readme.txt file
>>> explains how to install it and assign it to a function key.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Wed, Oct 17, 2012 at 12:41 PM, <usarobert at web.de> wrote:
>>>
>>>> Hello,
>>>> I do have an FT-2000. The Transiver is (within Limits) able to receive
>>>> on two Bands.
>>>> Now I have the following Problem :
>>>> with VFO-A I am on the 15 Meter Band, RX and TX and I do S&P. The VFO-B
>>>> I have parked on the 10 Meter Band. As soon as I turn the RX on for VFO-B
>>>> all QSOs are logged as 10 Meter contacts. But I still do RX and TX on 15
>>>> Meters.
>>>> What have I set wrong ?
>>>>
>>>> 73s
>>>>
>>>> Robert
>>>> DC2KN
>>>> _______________________________________________
>>>> Support mailing list
>>>> support at win-test.com
>>>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>>
>>>
>>>
>> _______________________________________________
>> Support mailing list
>> support at win-test.com
>> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20121017/8784dab9/attachment-0001.html>