[WT-support] Network problem, explosion of duplicates

[Zoli Pitman HA1AG]

Hmmm. 

Can't it be something so simple as a L2 switching loop in your IP network Tonno ? 

73, 

zoli ha1ag




________________________________
 From: Tõnno Vähk <tonno.vahk at gmail.com>
To: support at win-test.com 
Sent: Saturday, November 3, 2012 10:56 AM
Subject: Re: [WT-support] Network problem, explosion of duplicates
 

This is a good question. I have started to think myself that this might be maybe a way to find the conflict.
 
The stations were configured as such:
 
STN1 – RUN
STN2 – RUN+
STN3 – RUN+
STN4 – RUN+
STN5 – MULT
 
So STN1 was running and STN2 was helping him to listen to RUN frequency with another RX antenna and could also log QSOs. And interlocked STN3 and STN4 were doing S&P on the run band.
 
It is of course possible to have several support stations, the program enables that.
 
Additionally STN2 had SO2R configured so that it was able to switch Active Radio and work multipliers on other bands. The 2nd Radio for STN2 was configured as MULT+.
 
It seems that the problems of the network were originated from this STN2. The error messages and the mupliplication of the last QSO happened in this computer. Maybe the operator forgot to change the active radio and logged a multiplier on another band while being RUN+... But can something like that cause such network issue...
 
What if two RUN+ stations logged a QSO with different station at exactly the same moment...
 
Windows XP and antivirus this Microsoft Security Essentials..
 
From:support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] On Behalf Of Patrick 9A5CW
Sent: Friday, November 02, 2012 10:18 PM
To: support at win-test.com
Subject: Re: [WT-support] Network problem, explosion of duplicates
 
Hi,
questions:
how many RUNNER - RUN + RUN support + PARTNER where on the network?
How many MULT stations where on Network?
Station identifiers each differnet in WT? example RUN1 (1st OP), RUN2 (2nd op PARTNER), RUNDINBAND, MULT1, MULT2 ? (cud be secret!;) ) Maybe some of those make conflicts on Network.
What windows do you use?
What anivirus on each PC? if any...
Something duplicates the WT UDP data protocol on the network!
@ 9A1P with WT 4.8.0 i think nothing similar ever happen, using there RUN1, RUN2 (2nd op Partner) + MULT (total 3 PCs/mix of XP and win7 + standard network switch).
Best 73, Patrik 9A5CW
_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20121103/7aee7b03/attachment.html>